Update high-avaliability ODC|V4.3.3|OceanBase Developer Center|ODC docs|Distributed Database

Stop ODC of the earlier version

When upgrading OceanBase Developer Center (ODC) deployed in high availability mode, you need to stop running ODC of the earlier version after you update the MetaDB.

Run the docker ps -a command in the command-line tool of the host to view the running containers.You can find the container ID of the earlier NGINX image in the CONTAINER ID column based on the image name in the IMAGE column. Execution result:

C:\Users\ob>docker ps -a
CONTAINER ID        IMAGE                                      COMMAND                  CREATED             STATUS              PORTS                                      NAMES
8bfecbc1cd03        acs-reg.alipay.com/oceanbase/obodc:2.0.1   "/bin/sh -c '/usr/bi..."   13 days ago         Up 13 days          80/tcp, 8080/tcp, x.x.x.x:8989->8989/tcp   obodc

After you obtain the container ID, run the docker stop <CONTAINER ID>; command in the command-line tool to stop the ODC container of the earlier version. Execution result:
```
C:\Users\ob>docker stop 8bfecbc1cd03
8bfecbc1cd03
```
Run the docker rm <CONTAINER ID>; command in the command-line tool to delete the ODC image of the earlier version and release the port occupied. Execution result:
```
C:\Users\ob>docker rm 8bfecbc1cd03
8bfecbc1cd03
```

Backup the Meta Database

Notice

Before upgrading, please back up the Meta Database. The backed-up Meta Database can be used to roll back the ODC version in case of an upgrade failure.

Example: Create ~/odcmetadb_backup as the backup file path for the Meta Database and back up the ODC Meta Database.

#create backup directory
mkdir -p ~/odcmetadb_backup

#backup odc metadb
./obdumper --thread 1 -h <host> -P <port> -u <username> -c <cluster_name> -t <tenant_name> -D <database_name> --ddl --csv --no-sys --all -f ~/odcmetadb_backup

Note

For a description of the parameters used for backup, please refer to the OBDUMPER command line options.

Load and run an ODC image

When you upgrade OceanBase Developer Center (ODC) deployed in high availability mode, you need to obtain and run the ODC image again on each node after you update the MetaDB.

Load the image

Notice

The images of ODC V4.2.0 and later versions have been published to Docker Hub. If your local device running ODC can access Docker Hub, you can directly start ODC Docker without downloading the image. For details, see the Running Image content below.
If Docker Hub cannot be accessed directly, you still need to download and load the image file.

To obtain the ODC image on the host, select the required image from the Maintenance Tools of the OceanBase Download Center.
After you obtain the image, run the following command in the command-line tool to load it:
```
gunzip -c obodc-{$version}.tar.gz  docker load
```

Run the image

Execute the following sample statement in the command-line tool to run the image:

#!/usr/bin/env bash
docker run -v /var/log/odc:/opt/odc/log -v /var/data/odc:/opt/odc/data \
-d -i --net host --cpu-period 100000 --cpu-quota 400000 --memory 8G --name "obodc" \
-e "DATABASE_HOST=xxx.xx.xx.xx" \
-e "DATABASE_PORT=60805" \
-e "DATABASE_USERNAME=db_user@tenant_name#cluster_name" \
-e "DATABASE_PASSWORD=******" \
-e "DATABASE_NAME=odc_metadb" \
-e "ODC_PROFILE_MODE=alipay" \
-e "ODC_ADMIN_INITIAL_PASSWORD=******" \
oceanbase/odc:4.2.2

Notice

In the shell environment, if a string contains special characters such as ! or $, you must use single quotation marks to enclose the value of the variable. For example: DATABASE_PASSWORD='11111!'.

The following table describes parameters used in the preceding sample statement.

Parameter	Description
-v	Maps the `/var/log/odc` directory of the host to the `/opt/odc/log` directory in the ODC container. If the `/var/log/odc` directory does not exist on the host, run the `mkdir -p /var/log/odc` command to create one. Mounts the `/var/data/odc` directory of the host to the `/opt/odc/data` directory in the ODC container. If the `/var/data/odc` directory does not exist on the host, run the `mkdir -p /var/data/odc` command to create one.
--net	The network configuration of the Docker container. If you set this parameter to `host`, the host network is directly used. You can also use the `--publish` (`-p`) parameter to configure port mapping. However, the Docker container may fail to start in some circumstances due to incorrect DNS resolution in the Docker container. In this case, run the `--net host` command to start the Docker container.
--cpu-period --cpu-quota	* The `---cpu-period` parameter specifies the interval at which the CPU cores of the Docker container are reallocated. Unit: microseconds. * The `---cpu-quota` parameter specifies the maximum time for running the current Docker container in this interval. Unit: microseconds. You can use these two parameters in combination to specify the number of CPU cores that the Docker container uses. The value is calculated by dividing cpu-quota by cpu-period. In the preceding sample statement, the values of cpu-quota and cpu-period are respectively 400000 and 100000, indicating that the Docker container can use at most four CPU cores.
--memory	The maximum memory size for the Docker container.
--name	The name of the container.
DATABASE_HOST	The IP address of the MetaDB.
DATABASE_PORT	The port number of the MetaDB.
DATABASE_USERNAME	The username of the MetaDB. In OceanBase Database, the username is given in the db_user@tenant_name#cluster_name format.
DATABASE_PASSWORD	The password for connecting to the database.
DATABASE_NAME	The name of the MetaDB.
ODC_PROFILE_MODE	The mode. Default value: `alipay`.
ODC_ADMIN_INITIAL_PASSWORD	Specify the initial password of the ODC administrator account (admin). Notice The initial password should contain at least 2 digits, 2 uppercase letters, 2 lowercase letters and 2 special characters (._+@#$%), with a length of 8~32 digits, and the password cannot contain spaces.

In addition to the preceding parameters, you can also use the following parameters when running the image.

Parameter	Description
ODC_LOG_DIR	The log directory. Default value: `/opt/odc/log`.
ODC_JVM_HEAP_OPTIONS	The JVM memory configuration. Default value: `-XX:MaxRAMPercentage=60.0 -XX:InitialRAMPercentage=60.0`, indicating that 60% of the memory is used, and the JVM memory can be customized by specifying the parameter `ODC_JVM_HEAP_OPTIONS`. Example: `-Xmx2048m -Xms2048m`, indicating that the heap memory is set to 2G.
ODC_JVM_GC_OPTIONS	The garbage collection (GC) strategy for JVM. Default value: `-XX:+UseG1GC -XX:+PrintAdaptiveSizePolicy -XX:+PrintGCDetails -XX:+PrintGCTimeStamps -XX:+PrintGCDateStamps -Xloggc:/opt/odc/log/gc.log -XX:+UseGCLogFileRotation -XX:GCLogFileSize=50M -XX:NumberOfGCLogFiles=5`.
ODC_JVM_OOM_OPTIONS	The OutOfMemory strategy for JVM. Default value: `-XX:+ExitOnOutOfMemoryError`.
ODC_JVM_EXTRA_OPTIONS	Other JVM parameters. By default, no parameter is specified.
ODC_SERVER_PORT	The HTTP listening port for ODC-Server. Default value: 8989.
ODC_HOST	The IP address of ODC, which can be used as the destination IP address for remote procedure calls in high-availability deployment scenarios.
ODC_MAPPING_PORT	The port number of the ODC runtime to avoid the problem that the port number cannot be used due to the deployment environment. This parameter is suitable for port mapping when deploying ODC in Docker.
ODC_APP_EXTRA_ARGS	Other App parameters need to be specified. For example, `--server.servlet.session.timeout=10m`, indicating that the Session period is 10 minutes. The default value is empty.

Upgrade NGINX image

When you upgrade Web ODC, you can choose whether to upgrade the NGINX image to the latest version. To upgrade the NGINX image, you must stop and delete the old image, obtain the image of the latest version on the host, and deploy the NGINX proxy.

Stop and delete the old image

Before you deploy the NGINX image of the latest version, you must stop and delete the NGINX image that is running on the host.

Run the docker ps -a command in the command-line tool of the host to view the running containers. You can find the container ID of the earlier NGINX image in the CONTAINER ID column based on the image name in the IMAGE column. Execution result:

"  C:\Users\ob>docker ps -a
CONTAINER ID        IMAGE            COMMAND                  CREATED             STATUS              PORTS                                      NAMES
8bfecbc1cd03        bdd6f8916e8b    "/bin/sh -c '/usr/bi... 13 days ago            Up 13 days          80/tcp, 8080/tcp, x.x.x.x:8989->8989/tcp   nginx

After you obtain the container ID, run the docker stop <CONTAINER ID>; command in the command-line tool to stop the ODC container of the earlier version. Execution result:
```
C:\Users\ob>docker stop 8bfecbc1cd03
8bfecbc1cd03
```
Run the docker rm <CONTAINER ID>; command in the command-line tool to delete the ODC image of the earlier version and release the port occupied. Execution result:
```
C:\Users\ob>docker rm 8bfecbc1cd03
8bfecbc1cd03
```

Load the new image

You can use the following methods to load the NGINX image of the latest version:

Pull the image from the Docker warehouse on the host.
Download the image package to a local device, copy the package to the host, and decompress the package.

Pull the image from the Docker warehouse

Ensure that Docker is installed on the host and the host has access to the Internet. Then, run the following command in the command-line tool to pull the NGINX image from the Docker warehouse:

docker pull nginx

Copy the image package to the host and decompress the package

Ensure that Docker is installed on the host and the host has access to the Internet. Then, run the following command on the host to download the image package to a local device:

docker save nginx:latest | gzip - >nginx.tar.gz

Copy the image package to the host and run the following command to load the image:

gunzip -c nginx.tar.gz | docker load

Configure the configuration file

Before you start running the NGINX image, you must modify settings of the configuration file. The ODC image package contains templates of the configuration file. You can copy a template to a local device and edit the configuration where necessary. The templates of the configuration file vary, depending on whether you have deployed a self-signed certificate. We recommend that you copy a template based on the deployment and modify the configuration where necessary.

Configure the configuration file that does not contain the self-signed certificate

Run the following command to copy the configuration file from the image package to the host for editing. You can customize the copy path as needed, and replace the tilde (~) with the local path of the configuration file:

docker cp -a <odc_image_name>:/opt/odc/conf/nginx.conf.template  ~/<conf_local_path>

The following code shows a template of the configuration file. We recommend that you pay attention to the content that requires changes based on the comments.

# Nginx conf template for http deployment
# For more information on configuration, see:
#   * Official English Documentation: http://nginx.org/en/docs/

user nginx;
worker_processes auto;
error_log /var/log/nginx/error.log;
pid /run/nginx.pid;

# Load dynamic modules. See /usr/share/doc/nginx/README.dynamic.
include /usr/share/nginx/modules/*.conf;

events {
    worker_connections 1024;
}

http {
    log_format  main  '$remote_addr - $remote_user [$time_local] "$request" '
                      '$status $body_bytes_sent "$http_referer" '
                      '"$http_user_agent" "$http_x_forwarded_for"';

    access_log  /var/log/nginx/access.log  main;

    sendfile            on;
    tcp_nopush          on;
    tcp_nodelay         on;
    keepalive_timeout   65;
    types_hash_max_size 2048;

    #set 0 to disable request body size check, for support large size file upload
    client_max_body_size 0;

    include             /etc/nginx/mime.types;
    default_type        application/octet-stream;

    # for websocket configuration
    map $http_upgrade $connection_upgrade {
        default upgrade;
        '' close;
    }

    # load balancing configuration
    # notice under_score character are not allowed for upsteram name, 400 Bad Request happens if used
    # please use ip_hash strategy
    # one server line for each odc-server node
    upstream odcbackends {
      ip_hash;
      # PLEASE CHANGE to real odc-server address (Optional)
      server xxx.x.x.x:8989;
      # add more servers here
    }

    #https server, proxy to odc-server 8989 port
    server {
        listen 80;
        # uncomment below if ipv6 enabled

        #listen [::]:80;

        # PLEASE CHANGE to your site domain (Optional)
        server_name  odc.oceanbase.com;

        location / {
            proxy_pass http://odcbackends;
            proxy_http_version 1.1;
            proxy_set_header Upgrade $http_upgrade;
            proxy_set_header Connection "upgrade";
            proxy_set_header X-Forwarded-Host $host;
            proxy_set_header X-Forwarded-For  $proxy_add_x_forwarded_for;
            proxy_read_timeout 1800;
            proxy_send_timeout 1800;
            proxy_connect_timeout 75;
            proxy_next_upstream off;
        }
    }

}

Configure the configuration file that contains a self-signed certificate

docker cp -a <odc_image_name>:/opt/odc/conf/nginx.conf.https.template  ~/<conf_local_path>

The following code shows a template of the configuration file. We recommend that you pay attention to the content that requires changes based on the comments.

# Nginx conf template for https deployment
# For more information on configuration, see:
#   * Official English Documentation: http://nginx.org/en/docs/

user nginx;
worker_processes auto;
error_log /var/log/nginx/error.log;
pid /run/nginx.pid;

# Load dynamic modules. See /usr/share/doc/nginx/README.dynamic.
include /usr/share/nginx/modules/*.conf;

events {
    worker_connections 1024;
}

http {
    log_format  main  '$remote_addr - $remote_user [$time_local] "$request" '
                      '$status $body_bytes_sent "$http_referer" '
                      '"$http_user_agent" "$http_x_forwarded_for"';

    access_log  /var/log/nginx/access.log  main;

    sendfile            on;
    tcp_nopush          on;
    tcp_nodelay         on;
    keepalive_timeout   65;
    types_hash_max_size 2048;

    #set 0 to disable request body size check, for support large size file upload
    client_max_body_size 0;

    include             /etc/nginx/mime.types;
    default_type        application/octet-stream;

    # for websocket configuration
    map $http_upgrade $connection_upgrade {
        default upgrade;
        '' close;
    }

    # load balancing configuration
    # notice under_score character are not allowed for upsteram name, 400 Bad Request happens if used
    # please use ip_hash strategy
    # one server line for each odc-server node
    upstream odcbackends {
      ip_hash;
      # PLEASE CHANGE to real odc-server address (Optional)
      server xxx.x.x.x:8989;
      #add more servers here
    }

    # redirect http to https
    server {
        listen 80 default_server;

        # uncomment below if ipv6 enabled

        #listen [::]:80 default_server;

        location / {
            return 301 https://$host$request_uri;
        }
    }

    # https server, proxy to odc-server 8989 port
    server {
        listen 443 ssl http2;
        # uncomment below if ipv6 enabled

        #listen [::]:443 ssl http2;

        # PLEASE CHANGE to your site domain (Optional)
        server_name  odc.oceanbase.com;

        # you can use /opt/odc/bin/generate-odc-ssl-certificate.sh
        # to generate self certificated SSL certificates

        # PLEASE CHANGE certificate file location if unmatched

        ssl_certificate /etc/pki/nginx/odcserver.crt;
        ssl_certificate_key /etc/pki/nginx/odcserver.key;
        ssl_session_timeout 1d;
        ssl_session_cache shared:MozSSL:10m;  # about 40000 sessions
        ssl_session_tickets off;

        # intermediate configuration
        ssl_protocols TLSv1.2 TLSv1.3;
        ssl_ciphers ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384;
        ssl_prefer_server_ciphers off;

        # HSTS (ngx_http_headers_module is required) (63072000 seconds)
        add_header Strict-Transport-Security "max-age=63072000" always;

        location / {
            proxy_pass http://odcbackends;
            proxy_http_version 1.1;
            proxy_set_header Upgrade $http_upgrade;
            proxy_set_header Connection "upgrade";
            proxy_set_header X-Forwarded-Host $host;
            proxy_set_header X-Forwarded-For  $proxy_add_x_forwarded_for;
            proxy_read_timeout 1800;
            proxy_send_timeout 1800;
            proxy_connect_timeout 75;
            proxy_next_upstream off;
        }
    }

}

Note

You can modify the load balancing configurations to ensure sufficient proxy server timeout. The modification takes effect after you restart the NGINX proxy. We recommend that you set the proxy_connect_timeout parameter to a value of no longer than 75 seconds. For more information, see proxy_connect_timeout: http://nginx.org/en/docs/http/ngx_http_proxy_module.html#proxy_connect_timeout.
If you do not set the proxy_next_upstream parameter to off, the NGINX proxy will forward your requests to the next ODC node. In this case, you need to log in to ODC again, and cannot use features related to file upload and download, such as downloading the result set of an asynchronous task.

Start an image

After the configuration file is modified locally, run the following command in the command-line tool to restart the NGINX image. The tilde (~) indicates the local path of the configuration file.

docker run --network host --name nginx -v ～/<conf_local_path>:/etc/nginx/nginx.conf -v /etc/pki/nginx/:/etc/pki/nginx/ -d nginx

The following table lists parameters in the statement.

Parameter	Description
--network host	Specifies to use a network port of the host. You do not need to configure port mapping in this case. If you do not want to directly use the port of the host, you can specify the mapping ports using the `-p` parameter. For example, `-p 8080:80` specifies to map port 8080 of the host to port 80 of the Docker container. Likewise, `-p 8443:443` specifies to map port 8443 of the host to port 443 of the Docker container.
--name nginx	Sets the name of the container to nginx for easier management. You can use other names, for example, odc-nginx.
-v ~/<conf_local_path>:/etc/nginx/nginx.conf	Mounts the Docker container to the specified directory of the host and maps the local files of the host to the Docker container. `<conf_local_path>` specifies a local path of the configuration file on the host, and then maps the configuration file to the /etc/nginx/nginx.conf file in the Docker container.
-v /etc/pki/nginx/:/etc/pki/nginx/	Maps the /etc/pki/nginx/ path of the host to the /etc/pki/nginx/ path of the Docker container.
-d nginx	Specifies to run the Docker container in the background.

Customer Stories

Documentation

Update high-avaliability ODC

Stop ODC of the earlier version

Backup the Meta Database

Notice

Note

Load and run an ODC image

Load the image

Notice

Run the image

Notice

Notice

Upgrade NGINX image

Stop and delete the old image

Load the new image

Pull the image from the Docker warehouse

Copy the image package to the host and decompress the package

Configure the configuration file

Configure the configuration file that does not contain the self-signed certificate

Configure the configuration file that contains a self-signed certificate

Note

Start an image