4000 to 4499

These error codes indicate common errors.

ERROR 4000 (HY000): Common error

• Error code in OceanBase Database: 4000

• Cause: A common error occurred.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4001 (HY004): Object type error

• Error code in OceanBase Database: 4001

• Cause: The specified object type is invalid.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4003 (42000): Array index out of range

• Error code in OceanBase Database: 4003

• Cause: The array index is out of range.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4004 (08S01): Failed to listen to the port

• Error code in OceanBase Database: 4004

• Cause: The listener failed to start due to network disconnection.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4005 (HY000): The object is initialized twice

• Error code in OceanBase Database: 4005

• Cause: The object is repeatedly initialized.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4006 (HY000): The object is not initialized

• Error code in OceanBase Database: 4006

• Cause: The object is not initialized.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4008 (HY000): End of iteration

• Error code in OceanBase Database: 4008

• Cause: The iteration has ended.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4009 (58030): IO error

• Error code in OceanBase Database: 4009

• Cause: An I/O-related system call, such as a read request or a write request, failed.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4010 (HY000): Wrong RPC command version

• Error code in OceanBase Database: 4010

• Cause: The version of the remote procedure call (RPC) command is invalid.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4012 (HY000): Timeout

• Error code in OceanBase Database: 4012

• Cause: The execution timed out.

• Solution:

  • Reduce the amount of time required through performance tuning.

  • Extend the timeout period.

  • Contact OceanBase Technical Support for troubleshooting.

ERROR 4012 (HY000): Task timeout and not executed

• Error code in OceanBase Database: 4049

• MySQL error code: 4012

ERROR 4012 (HY000): RPC session not found

• Error code in OceanBase Database: 4067

• MySQL error code: 4012

ERROR 4012 (HY000): RPC send error

• Error code in OceanBase Database: 4121

• MySQL error code: 4012

ERROR 4012 (HY000): RPC post error

• Error code in OceanBase Database: 4122

• MySQL error code: 4012

ERROR 4012 (HY000): Timeout

• Error code in OceanBase Database: 4664

• MySQL error code: 4012

ERROR 4012 (HY000): Statement is timeout

• Error code in OceanBase Database: 6004

• MySQL error code: 4012

ERROR 4012 (25000): Transaction is timeout

• Error code in OceanBase Database: 6210

• MySQL error code: 4012

ERROR 4012 (25000): Statement is timeout

• Error code in OceanBase Database: 6212

• MySQL error code: 4012

ERROR 4012 (25000): Transaction result isunknown

• Error code in OceanBase Database: 6225

• MySQL error code: 4012

ERROR 4012 (25000): transaction rpc timeout

• Error code in OceanBase Database: 6230

• MySQL error code: 4012

ERROR 4013 (HY001): No memory or reach tenant memory limit

• Error code in OceanBase Database: 4013

• Cause: The tenant or OBServer node is out of memory.

• Solution: If a user tenant is out of memory, increase the memory size of the tenant. If an OBServer node is out of memory, contact OceanBase Database Technical Support for troubleshooting.

ERROR 4014 (HY000): Inner state error

• Error code in OceanBase Database: 4014

• Cause: An internal status error occurred.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4015 (HY000): System error

• Error code in OceanBase Database: 4015

• Cause: An internal error occurred.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4016 (HY000): Internal error

• Error code in OceanBase Database: 4016

• Cause: An internal error occurred.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4017 (HY000): Entry already exist

• Error code in OceanBase Database: 4017

• Cause: The specified data already exists.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4018 (HY000): Entry not exist

• Error code in OceanBase Database: 4018

• Cause: The specified data does not exist.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4019 (HY000): Size overflow

• Error code in OceanBase Database: 4019

• Cause: A space overflow occurred.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4020 (HY000): Reference count is not zero

• Error code in OceanBase Database: 4020

• Cause: The reference count is not 0.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4021 (HY000): Conflict value

• Error code in OceanBase Database: 4021

• Cause: The base library encountered a logic error, generally, a code error.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4022 (HY000): Item not set

• Error code in OceanBase Database: 4022

• Cause: No value is specified.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4023 (HY000): Try again

• Error code in OceanBase Database: 4023

• Cause: The operation needs to be retried.

• Solution: Retry the operation, or contact OceanBase Technical Support for troubleshooting.

ERROR 4024 (HY000): Buffer not enough

• Error code in OceanBase Database: 4024

• Cause: The storage space is insufficient.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4025 (HY000): Partial failed

• Error code in OceanBase Database: 4025

• Cause: Partial tasks that were initiated at a time failed.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4026 (02000): Nothing to read

• Error code in OceanBase Database: 4026

• Cause: No available data can be read.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4028 (HY000): Log entry not continuous

• Error code in OceanBase Database: 4028

• Cause: File IDs are inconsecutive.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4029 (HY000): Schema error

• Error code in OceanBase Database: 4029

• Cause: The schema failed to be obtained.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4030 (HY000): Over tenant memory limits

• Error code in OceanBase Database: 4030

• Cause: The tenant has insufficient memory.

• Solution: Increase the memory size of the tenant.

ERROR 4031 (HY004): Unknown object

• Error code in OceanBase Database: 4031

• Cause: The object is unknown.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4032 (22S01): Invalid cast from %s to %s.

• Error code in OceanBase Database: 7260

• MySQL error code: 4032

ERROR 4033 (22S04): Invalid cast from %s to %s. A polygon ring is in the wrong direction.

• Error code in OceanBase Database: 7261

• MySQL error code: 4033

ERROR 4033 (HY000): Serialize error

• Error code in OceanBase Database: 4033

• Cause: Serialization failed.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4034 (HY000): Deserialize error

• Error code in OceanBase Database: 4034

• Cause: Deserialization failed.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4034 (22S05): Arguments to function %s contains geometries with different SRIDs: %u and %u. All geometries must have the same SRID.

• Error code in OceanBase Database: 7262

• MySQL error code: 4034

ERROR 4035 (HY000): Asynchronous IO error

• Error code in OceanBase Database: 4035

• Cause: Asynchronous I/O-related system calls failed.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4036 (HY000): Need retry

• Error code in OceanBase Database: 4036

• Cause: The operation needs to be retried.

• Solution: Retry the operation, or contact OceanBase Technical Support for troubleshooting.

ERROR 4037 (HY000): Too many sstable

• Error code in OceanBase Database: 4037

• Cause: Excessive SSTables are generated, generally due to frequent minor compactions.

• Solution: Scale out the cluster to reduce the load on a single server, or contact OceanBase Technical Support for troubleshooting.

ERROR 4038 (HY000): The observer or zone is not the master

• Error code in OceanBase Database: 4038

• Cause: The current partition does not serve as the leader to provide services.

• Solution: Execute the current statement or transaction again.

ERROR 4039 (HY000): Request has killed by sql throttle

• Error code in OceanBase Database: 4039

• Cause: Throttling is enabled on SQL execution.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4041 (HY000): Decrypt error

• Error code in OceanBase Database: 4041

• Cause: Decryption failed.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4045 (HY000): pushdown status changed

• Error code in OceanBase Database: 4045

• Cause: An internal error occurred.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4048 (HY000): Not registered

• Error code in OceanBase Database: 4048

• Cause: An internal error occurred.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4050 (HY000): Not the object

• Error code in OceanBase Database: 4050

• Cause: An object mismatch occurred.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4052 (HY000): Corrupted log entry

• Error code in OceanBase Database: 4052

• Cause: The log data retrieved by the read request is invalid due to a hardware or disk error.

• Solution: Contact the database administrator for hardware troubleshooting, or contact OceanBase Technical Support for troubleshooting.

ERROR 4055 (HY000): Invalid entry

• Error code in OceanBase Database: 4055

• Cause: An internal status error occurred.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4057 (HY000): Decimal overflow warning

• Error code in OceanBase Database: 4057

• Cause: The precision of the input data is out of range.

• Solution: Reduce the precision of the input data.

ERROR 4058 (HY000): Decimal overflow error

• Error code in OceanBase Database: 4058

• Cause: The precision of the input data is out of range.

• Solution: Reduce the precision of the input data.

ERROR 4060 (HY000): Divide error

• Error code in OceanBase Database: 4060

• Cause: A division error occurred.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4061 (HY000): Not a decimal

• Error code in OceanBase Database: 4061

• Cause: The specified object type is invalid.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4062 (HY104): Decimal precision error

• Error code in OceanBase Database: 4062

• Cause: A numeric precision error occurred.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4063 (HY000): Empty range

• Error code in OceanBase Database: 4063

• Cause: The query range of the LIKE condition failed to be obtained.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4064 (HY000): Session killed

• Error code in OceanBase Database: 4064

• Cause: The current session is terminated.

• Solution: Contact the system administrator or database administrator for troubleshooting.

ERROR 4065 (HY000): Log not sync

• Error code in OceanBase Database: 4065

• Cause: Replica logs are not synchronized.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4068 (HY000): Invalid log

• Error code in OceanBase Database: 4068

• Cause: Logs are invalid.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4070 (HY000): Invalid data

• Error code in OceanBase Database: 4070

• Cause: Data is invalid.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4071 (HY000): Already done

• Error code in OceanBase Database: 4071

• Cause: The operation has been completed.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4072 (HY000): Operation canceled

• Error code in OceanBase Database: 4072

• Cause: The operation has been canceled.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4074 (HY000): Log not aligned

• Error code in OceanBase Database: 4074

• Cause: Logs are not aligned.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4075 (HY000): Log entry missed

• Error code in OceanBase Database: 4075

• Cause: Logs are not found.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4076 (HY000): Need wait

• Error code in OceanBase Database: 4076

• Cause: Waiting is required.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4077 (0A000): Not implemented feature

• Error code in OceanBase Database: 4077

• Cause: The feature is not supported.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4080 (HY013): exceed memory limit

• Error code in OceanBase Database: 4080

• Cause: An internal error occurred. The size of used memory exceeds the upper limit.

• Solution: Troubleshooting is not required.

ERROR 4084 (02000): No result

• Error code in OceanBase Database: 4084

• Cause: The value of the parameter is not found.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4085 (HY000): Queue overflow

• Error code in OceanBase Database: 4085

• Cause: A queue overflow occurred.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4090 (HY000): Table log_id range no continuous

• Error code in OceanBase Database: 4090

• Cause: Log IDs of SSTables in a partition are inconsecutive.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4098 (HY000): Term not match

• Error code in OceanBase Database: 4098

• Cause: A replica proposal_id mismatch occurred.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4103 (42000): Data checksum error

• Error code in OceanBase Database: 4103

• Cause: A data checksum error occurred.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4104 (HY000): Initialize error

• Error code in OceanBase Database: 4104

• Cause: Initialization failed.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4105 (HY000): Rowkey order error

• Error code in OceanBase Database: 4105

• Cause: The sequence of primary keys is not as expected.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4107 (HY000): block switched when fill commitlog

• Error code in OceanBase Database: 4107

• Cause: The buffer used for Group Commit operations must be switched.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4108 (HY000): Physic data checksum error

• Error code in OceanBase Database: 4108

• Cause: A physical data checksum error occurred due to a disk failure or a program bug.

• Solution: Check the hardware, or contact OceanBase Technical Support for troubleshooting.

ERROR 4109 (HY000): Server state or role not the same as expected

• Error code in OceanBase Database: 4109

• Cause: A status mismatch occurred.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4111 (HY000): block need freeze

• Error code in OceanBase Database: 4111

• Cause: The block needs to be frozen.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4112 (HY000): block frozen

• Error code in OceanBase Database: 4112

• Cause: The block has been frozen.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4113 (HY000): In FATAL state

• Error code in OceanBase Database: 4113

• Cause: The status is invalid.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4114 (08S01): In STOP state

• Error code in OceanBase Database: 4114

• Cause: The OBServer node is being stopped.

• Solution: If the error persists, contact OceanBase Technical Support for troubleshooting.

ERROR 4119 (08000): RPC packet to send too long

• Error code in OceanBase Database: 4119

• Cause: The length of the remote procedure call (RPC) packet exceeds the upper limit.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4120 (HY000): Log too large

• Error code in OceanBase Database: 4120

• Cause: The log size exceeds the upper limit.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4123 (08000): Libeasy error

• Error code in OceanBase Database: 4123

• Cause: Network initialization failed.

• Solution: Contact the system administrator or database administrator for troubleshooting.

ERROR 4124 (HY000): Connect error

• Error code in OceanBase Database: 4124

• Cause: A connection to the server failed to be established.

• Solution: Contact the system administrator or database administrator for troubleshooting.

ERROR 4128 (HY000): RPC packet is invalid

• Error code in OceanBase Database: 4128

• Cause: The format of the RPC packet is invalid.

• Solution: Contact the system administrator or database administrator for troubleshooting.

ERROR 4138 (HY000): Request to read too old versioned data

• Error code in OceanBase Database: 4138

• Cause: The version of the accessed data is outdated.

• Solution: Execute the statement again, or increase the value of the undo_retention parameter.

ERROR 4143 (42000): Version not match

• Error code in OceanBase Database: 4143

• Cause: A version mismatch occurred.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4147 (HY000): Invalid config

• Error code in OceanBase Database: 4147

• Cause: The current configuration is invalid.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4150 (42000): Min value

• Error code in OceanBase Database: 4150

• Cause: The operation attempted to access the invalid minimum special value in the internal table.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4151 (42000): Max value

• Error code in OceanBase Database: 4151

• Cause: The operation attempted to access the invalid maximum special value in the internal table.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4152 (42000): Null value

• Error code in OceanBase Database: 4152

• Cause: The operation attempted to access an invalid null value in the internal table.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4154 (HY000): Internal SQL client error

• Error code in OceanBase Database: 4154

• Cause: An internal SQL client error occurred.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4161 (42000): Invalid argument num

• Error code in OceanBase Database: 4161

• Cause: The number of specified parameters is invalid.

• Solution: Check the parameter list, or contact OceanBase Technical Support for troubleshooting.

ERROR 4162 (HY000): reserved lease not enough

• Error code in OceanBase Database: 4162

• Cause: The validity period of the lease is insufficient.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4165 (HY000): Empty result

• Error code in OceanBase Database: 4165

• Cause: The result set is empty.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4168 (HY000): Invalid log module id

• Error code in OceanBase Database: 4168

• Cause: The log module ID is invalid.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4169 (HY000): Unknown module name. Invalid Setting:'%.*s'. Syntax:parMod.subMod:level, parMod.subMod:level

• Error code in OceanBase Database: 4169

• Cause: The log module name that you specified when you set the log generation level on the client is invalid.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4170 (HY000): Invalid level. Invalid setting:'%.*s'. Syntax:parMod.subMod:level, parMod.subMod:level

• Error code in OceanBase Database: 4170

• Cause: The log generation level that you set on the client is invalid.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4171 (HY000): Syntax to set log_level error. Invalid setting:'%.*s'. Syntax:parMod.subMod:level, parMod.subMod:level

• Error code in OceanBase Database: 4171

• Cause: The syntax that you used to set the log generation level on the client is invalid.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4172 (HY000): Index out of range

• Error code in OceanBase Database: 4172

• Cause: The index is out of range.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4175 (42000): Out of range

• Error code in OceanBase Database: 4175

• Cause: The value is out of range.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4177 (42000): Schema version too old

• Error code in OceanBase Database: 4177

• Cause: The local schema version is outdated.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR4179 (HY000): %s not allowed

• Error code in OceanBase Database: 4179

• Cause: The feature is not supported.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4180 (HY000): No empty entry

• Error code in OceanBase Database: 4180

• Cause: The data entry is not empty.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4181 (42S01): Already exist

• Error code in OceanBase Database: 4181

• Cause: The entry already exists in the location cache.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4182 (HY000): Value not found

• Error code in OceanBase Database: 4182

• Cause: The value is not found.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4183 (HY000): Key out of range

• Error code in OceanBase Database: 4183

• Cause: The key is out of range.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4184 (53100): ChunkServer out of disk space

• Error code in OceanBase Database: 4184

• Cause: The disk space is fully occupied.

• Solution: Add servers for scale-out, or contact OceanBase Technical Support for troubleshooting.

ERROR 4186 (HY000): ChunkServer failed to get compress library

• Error code in OceanBase Database: 4186

• Cause: No compression library is found.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4187 (HY000): Item not match

• Error code in OceanBase Database: 4187

• Cause: A value mismatch occurred.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4189 (HY000): the macro block type does not exist

• Error code in OceanBase Database: 4189

• Cause: The specified macroblock type does not exist.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4191 (HY000): partition group is removed

• Error code in OceanBase Database: 4191

• Cause: The partition has been deleted.

• Solution: Troubleshooting is not required.

ERROR 4200 (HY000): hash map/set entry exist

• Error code in OceanBase Database: 4200

• Cause: The HASH value already exists.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4201 (HY000): hash map/set entry not exist

• Error code in OceanBase Database: 4201

• Cause: The HASH value does not exist.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4204 (HY000): hash map/set get timeout

• Error code in OceanBase Database: 4204

• Cause: The HASH operation timed out.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4205 (HY000): hash map/set retry

• Error code in OceanBase Database: 4205

• Cause: The HASH operation needs to be retried.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4206 (HY000): hash map/set full

• Error code in OceanBase Database: 4206

• Cause: The HashMap instance is full.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4208 (HY000): wait next packet timeout

• Error code in OceanBase Database: 4208

• Cause: No subsequent packets are received within the timeout period.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4209 (HY000): partition has not leader

• Error code in OceanBase Database: 4209

• Cause: The partition has no leader.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4210 (HY000): prepare major freeze failed

• Error code in OceanBase Database: 4210

• Cause: The preparation for a major compaction failed.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4211 (HY000): commit major freeze failed

• Error code in OceanBase Database: 4211

• Cause: The commit of a major freeze failed.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4212 (HY000): abort major freeze failed

• Error code in OceanBase Database: 4212

• Cause: The rollback of a major freeze failed.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4213 (HY000): last major freeze not finish

• Error code in OceanBase Database: 4213

• Cause: The last major compaction has not been completed.

• Solution: Wait until the last major compaction is completed, and then initiate a new major compaction.

ERROR 4215 (HY000): wait major freeze response timeout

• Error code in OceanBase Database: 4215

• Cause: No major freeze response is returned within the timeout period.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4216 (HY000): curl error

• Error code in OceanBase Database: 4216

• Cause: A libcurl access error occurred.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4217 (HY000): Major freeze not allowed now

• Error code in OceanBase Database: 4217

• Cause: Major freezes are not allowed when the system is in the current state.

• Solution: Check whether the system is being upgraded or in the process of another operation.

ERROR 4218 (HY000): prepare freeze failed

• Error code in OceanBase Database: 4218

• Cause: The preparation for a freeze failed.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4220 (HY000): Inactive sql client, only read allowed

• Error code in OceanBase Database: 4220

• Cause: The SQL client is inactive.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4221 (HY000): Inactive rpc proxy, can not send RPC request

• Error code in OceanBase Database: 4221

• Cause: The RPC client is not initialized.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4222 (42000): Interval with year or month can not be converted to microseconds

• Error code in OceanBase Database: 4222

• Cause: The system encountered an error when converting the time data type.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4223 (42000): Interval has too many datetime parts

• Error code in OceanBase Database: 4223

• Cause: The system encountered an error when converting the time data type.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4225 (HY000): Partition entry not exists

• Error code in OceanBase Database: 4225

• Cause: The specified partition does not exist.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4232 (HY000): The observer or zone is not a follower

• Error code in OceanBase Database: 4232

• Cause: The OBServer node or zone to be accessed is not a follower.

• Solution: This is an internal error code. Contact OceanBase Technical Support for troubleshooting.

ERROR 4233 (HY000): smaller than container lower bound

• Error code in OceanBase Database: 4233

• Cause: The value is below the lower limit of the container.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4234 (HY000): bigger than container upper bound

• Error code in OceanBase Database: 4234

• Cause: The value is above the upper limit of the container.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4236 (HY000): ObConfig return error code

• Error code in OceanBase Database: 4236

• Cause: OceanBase Database encountered an error when accessing ConfigServer.

• Solution: Check the obconfig_url parameter to determine whether ConfigServer is running properly, and contact OceanBase Technical Support for troubleshooting.

ERROR 4237 (HY000): Appname mismatch with obconfig result

• Error code in OceanBase Database: 4237

• Cause: The cluster name specified for ConfigServer is inconsistent with the actual cluster name.

• Solution: Check the obconfig_url parameter and contact OceanBase Technical Support for troubleshooting.

ERROR 4239 (HY000): Can not use merge-join to join the tables without join conditions

• Error code in OceanBase Database: 4239

• Cause: A kernel error occurred.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4240 (HY000): No join order generated

• Error code in OceanBase Database: 4240

• Cause: A kernel error occurred.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4241 (HY000): No join path generated

• Error code in OceanBase Database: 4241

• Cause: A kernel error occurred.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4242 (HY000): Schema error

• Error code in OceanBase Database: 4242

• Cause: The execution server failed to obtain the schema.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4243 (HY000): file not opened

• Error code in OceanBase Database: 4243

• Cause: The file is not opened.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4244 (HY000): Timer task has been scheduled

• Error code in OceanBase Database: 4244

• Cause: A timer task has been scheduled.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4245 (HY000): Timer task has not been scheduled

• Error code in OceanBase Database: 4245

• Cause: No timer task is scheduled.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4246 (HY000): parse debug sync string error

• Error code in OceanBase Database: 4246

• Cause: The string of debug_sync does not conform to the syntax.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4247 (HY000): unknown debug sync point

• Error code in OceanBase Database: 4247

• Cause: The debug sync point does not exist.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4248 (HY000): task is interrupted while running

• Error code in OceanBase Database: 4248

• Cause: The distributed task execution scheduler was interrupted and stopped in advance.

• Solution: This is an internal error code. Contact OceanBase Technical Support for troubleshooting.

ERROR 4250 (HY000): module is not running

• Error code in OceanBase Database: 4250

• Cause: The module has not been started.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4251 (HY000): partition not valid

• Error code in OceanBase Database: 4251

• Cause: The partition is invalid.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4253 (HY000): Comment for tenant is too long (max = %ld)

• Error code in OceanBase Database: 4253

• Cause: The length of the COMMENT for a tenant in a DDL statement exceeds the upper limit.

• Solution: Shorten the COMMENT in the DDL statement.

ERROR 4257 (HY000): compress data or decompress data failed

• Error code in OceanBase Database: 4257

• Cause: Data compression or decompression failed because the data was corrupted.

• Solution: Contact the database administrator to check the hardware and replace the faulty server or recover the data.

ERROR 4263 (HY000): Minor freeze not allowed now

• Error code in OceanBase Database: 4263

• Cause: Minor freezes are not allowed when the system is in the current state.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4264 (HY000): Log out of disk space

• Error code in OceanBase Database: 4264

• Cause: The log disk is fully occupied.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4265 (HY000): Rpc connect error

• Error code in OceanBase Database: 4265

• Cause: A RPC connection failed to be established.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4266 (HY000): minor merge not allow

• Error code in OceanBase Database: 4266

• Cause: Minor compactions are not allowed when the system is in the current state.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4270 (HY000): Working partition entry does not exists

• Error code in OceanBase Database: 4270

• Cause: The partition status is abnormal.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4271 (HY000): LIBEASY reach memory limit

• Error code in OceanBase Database: 4271

• Cause: The memory size occupied by unsent libeasy packets has exceeded the upper limit.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4273 (HY000): free memblock in cache is not enough

• Error code in OceanBase Database: 4273

• Cause: Available memory blocks in the cache are insufficient.

• Solution: Increase the memory size, reduce the load, or contact OceanBase Technical Support for troubleshooting.

ERROR 4274 (HY000): sync wash memblock timeout

• Error code in OceanBase Database: 4274

• Cause: Memory blocks were not released within the timeout period.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4278 (HY000): last log is not complete

• Error code in OceanBase Database: 4278

• Cause: The last log is incomplete due to a power failure or an emergency.

• Solution: Restart the OBServer node or contact OceanBase Technical Support for troubleshooting.

ERROR 4279 (HY000): table is deleted

• Error code in OceanBase Database: 4279

• Cause: The table has been deleted.

• Solution: Check whether the SQL statement attempts to access the deleted table.

ERROR 4280 (HY000): version range not continues

• Error code in OceanBase Database: 4280

• Cause: The version range is inconsecutive.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4281 (HY000): io buffer is invalid

• Error code in OceanBase Database: 4281

• Cause: The I/O buffer is invalid.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4282 (HY000): partition is removed

• Error code in OceanBase Database: 4282

• Cause: The partition has been deleted.

• Solution: Check whether the operation is initiated on the deleted partition, or contact OceanBase Technical Support for troubleshooting.

ERROR 4283 (HY000): gts is not ready

• Error code in OceanBase Database: 4283

• Cause: Global Timestamp Service (GTS) is not available.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4286 (HY000): major sstable may has been merged

• Error code in OceanBase Database: 4286

• Cause: Baseline data has been compacted.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4287 (HY000): minor sstable version range cross

• Error code in OceanBase Database: 4287

• Cause: Version ranges of SSTables have an intersection.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4288 (HY000): memtable cannot minor merge

• Error code in OceanBase Database: 4288

• Cause: A minor compaction of the MemTable failed.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4289 (HY000): task exist

• Error code in OceanBase Database: 4289

• Cause: Duplicate tasks exist.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4290 (HY000): cannot allocate disk space

• Error code in OceanBase Database: 4290

• Cause: The available disk space is insufficient.

• Solution: Increase the disk space, or contact OceanBase Technical Support for troubleshooting.

ERROR 4297 (HY000): name is already used by an existing object

• Error code in OceanBase Database: 4297

• Cause: The specified object name is already used in the same namespace.

• Solution: Specify an object name that is not used in the namespace.

ERROR 4298 (HY000): %s does not exist

• Error code in OceanBase Database: 4298

• Cause: The specified sequence does not exist.

• Solution: Make sure that the specified sequence name is valid and that you have the required privilege to perform the operation on the sequence.

ERROR 4300 (HY000): invalid sequence name

• Error code in OceanBase Database: 4300

• Cause: The specified sequence name is invalid.

• Solution: Modify the sequence name.

ERROR 4301 (HY000): duplicate MAXVALUE/NOMAXVALUE specifications

• Error code in OceanBase Database: 4301

• Cause: Duplicate MAXVALUE or NOMAXVALUE settings exist.

• Solution: Deduplicate MAXVALUE or NOMAXVALUE settings.

ERROR 4302 (HY000): duplicate MINVALUE/NOMINVALUE specifications

• Error code in OceanBase Database: 4302

• Cause: Duplicate MINVALUE or NOMINVALUE settings exist.

• Solution: Deduplicate MINVALUE or NOMINVALUE settings.

ERROR 4303 (HY000): duplicate CYCLE/NOCYCLE specifications

• Error code in OceanBase Database: 4303

• Cause: Duplicate CYCLE or NOCYCLE settings exist.

• Solution: Deduplicate CYCLE or NOCYCLE settings.

ERROR 4304 (HY000): duplicate CACHE/NOCACHE specifications

• Error code in OceanBase Database: 4304

• Cause: Duplicate CACHE or NOCACHE settings exist.

• Solution: Deduplicate CACHE or NOCACHE settings.

ERROR 4305 (HY000): duplicate ORDER/NOORDER specifications

• Error code in OceanBase Database: 4305

• Cause: Duplicate ORDER or NOORDER settings exist.

• Solution: Deduplicate ORDER or NOORDER settings.

ERROR 4306 (HY000): conflicting MAXVALUE/NOMAXVALUE specifications

• Error code in OceanBase Database: 4306

• Cause: Conflicting MAXVALUE or NOMAXVALUE settings exist.

• Solution: Delete conflicting MAXVALUE or NOMAXVALUE settings.

ERROR 4307 (HY000): conflicting MINVALUE/NOMINVALUE specifications

• Error code in OceanBase Database: 4307

• Cause: Conflicting MINVALUE or NOMINVALUE settings exist.

• Solution: Delete conflicting MINVALUE or NOMINVALUE settings.

ERROR 4308 (HY000): conflicting CYCLE/NOCYCLE specifications

• Error code in OceanBase Database: 4308

• Cause: Conflicting CYCLE or NOCYCLE settings exist.

• Solution: Delete conflicting CYCLE or NOCYCLE settings.

ERROR 4309 (HY000): conflicting CACHE/NOCACHE specifications

• Error code in OceanBase Database: 4309

• Cause: Conflicting CACHE or NOCACHE settings exist.

• Solution: Delete conflicting CACHE or NOCACHE settings.

ERROR 4310 (HY000): conflicting ORDER/NOORDER specifications

• Error code in OceanBase Database: 4310

• Cause: Conflicting ORDER or NOORDER settings exist.

• Solution: Delete conflicting ORDER or NOORDER settings.

ERROR 4311 (HY000): cannot alter starting sequence number

• Error code in OceanBase Database: 4311

• Cause: The START WITH value of an auto-increment column cannot be modified.

• Solution: Do not modify the START WITH value.

ERROR 4312 (HY000): duplicate INCREMENT BY specifications

• Error code in OceanBase Database: 4312

• Cause: Duplicate INCREMENT BY settings exist.

• Solution: Deduplicate INCREMENT BY settings.

ERROR 4313 (HY000): duplicate START WITH specifications

• Error code in OceanBase Database: 4313

• Cause: Duplicate START WITH settings exist.

• Solution: Deduplicate START WITH settings.

ERROR 4314 (HY000): no options specified for ALTER SEQUENCE

• Error code in OceanBase Database: 4314

• Cause: No option is specified in the ALTER SEQUENCE statement.

• Solution: Options in statements are meaningful. Make sure that all the required options are specified in the statement.

ERROR 4315 (HY000): sequence number not allowed here

• Error code in OceanBase Database: 4315

• Cause: Auto-increment columns are not allowed for this operation.

• Solution: Delete the specified auto-increment column.

ERROR 4316 (HY000): sequence does not exist

• Error code in OceanBase Database: 4316

• Cause: The specified auto-increment column does not exist, or you do not have the required privilege.

• Solution: Make sure that the specified auto-increment column name is valid and that you have the required privilege on the column.

ERROR 4317 (HY000): sequence parameter %s must be an integer

• Error code in OceanBase Database: 4317

• Cause: A parameter value in the CREATE SEQUENCE or ALTER SEQUENCE statement is not an integer.

• Solution: When you create or modify an auto-increment column, specify integer values for parameters in the statement.

ERROR 4318 (HY000): INCREMENT must be a nonzero integer

• Error code in OceanBase Database: 4318

• Cause: The value of INCREMENT is not a non-zero integer.

• Solution: Set INCREMENT to a non-zero integer.

ERROR 4319 (HY000): sequence parameter exceeds maximum size allowed

• Error code in OceanBase Database: 4319

• Cause: A parameter value specified for the auto-increment column exceeds the maximum value allowed.

• Solution: Specify parameter values within the range allowed.

ERROR 4320 (HY000): MINVALUE must be less than MAXVALUE

• Error code in OceanBase Database: 4320

• Cause: In the CREATE SEQUENCE or ALTER SEQUENCE statement, the value of MINVALUE is not less than that of MAXVALUE.

• Solution: Make sure that the value of MINVALUE is less than that of MAXVALUE.

ERROR 4321 (HY000): INCREMENT must be less than MAXVALUE minus MINVALUE

• Error code in OceanBase Database: 4321

• Cause: In the CREATE SEQUENCE or ALTER SEQUENCE statement, the value of INCREMENT is not less than the difference between the values of MAXVALUE and MINVALUE.

• Solution: Make sure that the value of INCREMENT is less than the difference between the values of MAXVALUE and MINVALUE.

ERROR 4322 (HY000): START WITH cannot be less than MINVALUE

• Error code in OceanBase Database: 4322

• Cause: In the CREATE SEQUENCE or ALTER SEQUENCE statement, the value of START WITH is less than that of MINVALUE.

• Solution: Make sure that the value of START WITH is greater than or equal to that of MINVALUE.

ERROR 4323 (HY000): MINVALUE cannot be made to exceed the current value

• Error code in OceanBase Database: 4323

• Cause: The value of MINVALUE is greater than the current value.

• Solution: Make sure that the value of MINVALUE is less than the current value.

ERROR 4324 (HY000): START WITH cannot be more than MAXVALUE

• Error code in OceanBase Database: 4324

• Cause: The value of START WITH is greater than that of MAXVALUE.

• Solution: Make sure that the value of START WITH is less than that of MAXVALUE.

ERROR 4325 (HY000): MAXVALUE cannot be made to be less than the current value

• Error code in OceanBase Database: 4325

• Cause: The value of MAXVALUE is less than the current value.

• Solution: Make sure that the value of MAXVALUE is greater than the current value.

ERROR 4326 (HY000): the number of values to CACHE must be greater than 1

• Error code in OceanBase Database: 4326

• Cause: A parameter value in the CACHE clause is not greater than 1.

• Solution: Make sure that the parameter values in the CACHE clause are greater than 1.

ERROR 4327 (HY000): sequence option value out of range

• Error code in OceanBase Database: 4327

• Cause: A parameter value in the CREATE SEQUENCE or ALTER SEQUENCE statement is out of range.

• Solution: Specify parameter values within the range allowed.

ERROR 4328 (HY000): number to CACHE must be less than one cycle

• Error code in OceanBase Database: 4328

• Cause: The parameter values to be cached are not within one cycle.

• Solution: Lengthen the cycle, or cache fewer values.

ERROR 4329 (HY000): descending sequences that CYCLE must specify MINVALUE

• Error code in OceanBase Database: 4329

• Cause: MINVALUE is not specified for the descending auto-increment column.

• Solution: Create a sequence and specify MINVALUE.

ERROR 4330 (HY000): ascending sequences that CYCLE must specify MAXVALUE

• Error code in OceanBase Database: 4330

• Cause: MAXVALUE is not specified for the ascending auto-increment column.

• Solution: Create a sequence and specify MAXVALUE.

ERROR 4331 (HY000): sequence %s no longer exists

• Error code in OceanBase Database: 4331

• Cause: The specified auto-increment column does not exist.

• Solution: Create an auto-increment column.

ERROR 4332 (HY000): sequence exceeds %s and cannot be instantiated

• OceanBase error code: 4332

• Cause: The number of values in the auto-increment column has reached the upper limit, and no more values can be generated.

• Solution: Modify the auto-increment column to generate new values.

ERROR 4333 (HY000): divisor is equal to zero

• Error code in OceanBase Database: 4333

• Cause: The divisor is 0.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4334 (HY000): fail to decrypt data

• Error code in OceanBase Database: 4334

• Cause: Decryption failed.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4335 (HY000): fail to encrypt data

• Error code in OceanBase Database: 4335

• Cause: Encryption failed.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4337 (HY000): store directory structure error

• Error code in OceanBase Database: 4337

• Cause: A storage directory structure error occurred.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4338 (HY000): open twice

• Error code in OceanBase Database: 4338

• Cause: The file was repeatedly opened.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4339 (HY000): raid super block not match

• Error code in OceanBase Database: 4339

• Cause: The super block encountered an error.

• Solution: Check the disk or contact OceanBase Technical Support for troubleshooting.

ERROR 4340 (HY000): not opened

• Error code in OceanBase Database: 4340

• Cause: The item is not opened.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4341 (HY000): target module is not in service

• Error code in OceanBase Database: 4341

• Cause: Weak consistency reads are not enabled.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4342 (HY000): raid disk not in normal status

• Error code in OceanBase Database: 4342

• Cause: The disk status is abnormal.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4343 (HY000): tenant schema is not full

• Error code in OceanBase Database: 4343

• Cause: The local tenant schema version is outdated.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4344 (HY000): invalid timestamp

• OceanBase error code: 4344

• Cause: The specified timestamp is invalid.

• Solution: Specify a valid timestamp.

ERROR 4345 (HY000): dir not empty

• Error code in OceanBase Database: 4345

• Cause: The specified directory is not empty.

• Solution: Check whether the installation directory of OceanBase Database is valid.

ERROR 4346 (HY000): schema is not up to date for read

• Error code in OceanBase Database: 4346

• Cause: The local schema version is outdated.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4347 (HY000): role (string) does not exist

• Error code in OceanBase Database: 4347

• Cause: The role identified by ROLE does not exist.

• Solution: Specify a valid value for ROLE.

ERROR 4348 (HY000): role '%.*s' does not exist

• Error code in OceanBase Database: 4348

• Cause: A user or role with the specified name already exists.

• Solution: Specify another name.

ERROR 4349 (HY000): duplicate privilege listed

• Error code in OceanBase Database: 4349

• Cause: Duplicate privileges or roles are specified in the GRANT or REVOKE statement.

• Solution: Deduplicate the privileges or roles specified in the statement.

ERROR 4350 (HY000): the keystore already exists and each tenant can only have at most one

• Error code in OceanBase Database: 4350

• Cause: A Keystore already exists within the current tenant. You can create only one Keystore for a tenant.

• Solution: Check whether a Keystore has been created for the tenant.

ERROR 4351 (HY000): the keystore is not exist

• Error code in OceanBase Database: 4351

• Cause: No Keystore exists within the current tenant.

• Solution: Check whether a Keystore has been created for the tenant.

ERROR 4352 (HY000): the password is wrong for keystore

• Error code in OceanBase Database: 4352

• Cause: The specified Keystore password is invalid.

• Solution: Specify the valid password.

ERROR 4353 (HY000): tablespace '%.*s' already exists

• Error code in OceanBase Database: 4353

• Cause: A tablespace with the specified name already exists.

• Solution: Specify another name for the tablespace to be created.

ERROR 4354 (HY000): tablespace '%.*s' does not exist

• Error code in OceanBase Database: 4354

• Cause: The tablespace does not exist.

• Solution: Check whether the tablespace to be accessed exists.

ERROR 4355 (HY000): cannot delete a tablespace which is not empty

• Error code in OceanBase Database: 4355

• Cause: The tablespace to be deleted is not empty.

• Solution: Make sure that the tablespace is empty and then delete it.

ERROR 4356 (HY000): floating point precision is out of range(1 to 126)

• Error code in OceanBase Database: 4356

• Cause: The precision of BINARY_DOUBLE data is out of range.

• Solution: Reduce the precision of the data.

ERROR 4357 (HY000): numeric precision specifier is out of range (1 to 38)

• Error code in OceanBase Database: 4357

• Cause: The precision of NUMBER data is out of range.

• Solution: Reduce the precision of the data.

ERROR 4358 (HY000): numeric scale specifier is out of range (-84 to 127)

• Error code in OceanBase Database: 4358

• Cause: The precision of NUMBER data is out of range.

• Solution: Reduce the precision of the data.

ERROR 4359 (HY000): the keystore is not open

• Error code in OceanBase Database: 4359

• Cause: The Keystore is not open.

• Solution: Open the Keystore.

ERROR 4360 (HY000): the keystore opened with dont have a master key

• Error code in OceanBase Database: 4360

• Cause: No master key is available.

• Solution: Create a master key.

ERROR 4361 (HY000): slog active transaction entries reach maximum

• Error code in OceanBase Database: 4361

• Cause: The number of concurrent slog transactions exceeds the upper limit.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4362 (HY000): BY ACCESS | SESSION clause not allowed for NOAUDIT

• Error code in OceanBase Database: 4362

• Cause: The BY ACCESS or BY SESSION clause is specified in the NOAUDIT statement.

• Solution: Delete the BY ACCESS or BY SESSION clause.

ERROR 4363 (HY000): auditing the object is not supported

• Error code in OceanBase Database: 4363

• Cause: This type of object cannot be audited.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4364 (HY000): DDL statement cannot be audited with BY SESSION specified

• Error code in OceanBase Database: 4364

• Cause: The BY SESSION clause is used to audit the DDL statement.

• Solution: Delete the BY SESSION clause.

ERROR 4367 (HY000): The data more than 64M(rpc limit), split into smaller task and retry

• Error code in OceanBase Database: 4367

• Cause: When the data volume exceeds 64 MB, the execution task must be split into smaller tasks. This error code is used to instruct the execution scheduler to split the task and try again.

• Solution: This is an internal error code. Contact OceanBase Technical Support for troubleshooting.

ERROR 4368 (HY000): cluster %s not exist

• Error code in OceanBase Database: 4368

• Cause: When you access ConfigServer to obtain cluster information, ConfigServer returns this error code to indicate that the cluster does not exist.

• Solution: This is an internal error code. Contact OceanBase Technical Support for troubleshooting.

ERROR 4369 (HY000): fail to get master key

• Error code in OceanBase Database: 4369

• Cause: The master key failed to be obtained.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4370 (HY000): tde_method parameter is invalid

• Error code in OceanBase Database: 4370

• Cause: The value of tde_method for the tenant is invalid.

• Solution: Adjust the value of tde_method.

ERROR 4371 (HY000): kms server connect failed, may be kms server is down

• Error code in OceanBase Database: 4371

• Cause: A connection to Key Management Service (KMS) failed to be established.

• Solution: Check whether KMS is available.

ERROR 4372 (HY000): kms server is busy, try again

• Error code in OceanBase Database: 4372

• Cause: The KMS server is busy.

• Solution: Try again.

ERROR 4373 (HY000): kms server update key conflict at the same time, please try again

• Error code in OceanBase Database: 4373

• Cause: A conflict occurred when multiple master keys were updated at a time.

• Solution: Try again.

ERROR 4374 (HY000): value larger than specified precision allowed for this column

• Error code in OceanBase Database: 4374

• Cause: The precision of the current value is greater than the precision defined for the field.

• Solution: Adjust the value or the field definition.

ERROR 4375 (HY000): observer has disk error

• Error code in OceanBase Database: 4375

• Cause: The storage disk is faulty.

• Solution: Check whether the disk is faulty and replace the corresponding server.

ERROR 4376 (HY000): unimplemented feature

• Error code in OceanBase Database: 4376

• Cause: OceanBase Database does not support this feature.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4377 (HY000): fatal internal error in [%.*s]

• Error code in OceanBase Database: 4377

• Cause: OceanBase Database encountered an unexpected internal error, such as a program execution failure.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4378 (HY000): cluster name conflict

• Error code in OceanBase Database: 4378

• Cause: The specified cluster name already exists.

• Solution: Specify another cluster name.

ERROR 4388 (HY000): Unexpected internal error happen, please checkout the internal errcode

• Error code in OceanBase Database: 4388

• Cause: An unexpected internal error occurs.

• Solution: Contact OceanBase Technical Support for troubleshooting.

ERROR 4389 (HY000): Processing time is too long

• Error code in OceanBase Database: 4389

• Cause: The task processing time is too long.

• Solution: This is an internal error code. If this error is returned, contact OceanBase Technical Support for troubleshooting.