Migrate data from a MySQL tenant of OceanBase Database to a MySQL database

This topic describes how to use OceanBase Migration Service (OMS) to migrate data from a MySQL tenant of OceanBase Database to a MySQL database.

Background

You can create a data migration project in the OMS console to migrate the existing business data and incremental data from a MySQL tenant of OceanBase Database to a MySQL database through schema migration, full migration, and incremental synchronization.

The MySQL database supports the following modes: primary database only, standby database only, and primary/standby databases. The following table describes the data migration operations supported by each mode.

Prerequisites

You have created dedicated database users in the source MySQL tenant of OceanBase Database and the destination MySQL database for data migration and granted the corresponding privileges to the users. For more information, see Create a database user.

Limits

• OMS supports the following MySQL database versions: 5.5, 5.6, 5.7, and 8.0.

• OMS cannot migrate a table without the primary key from a MySQL tenant of OceanBase Database to a MySQL database.

• If the lower_case_table_names settings of the source and destination are different, the project cannot be created. In addition, OMS does not support the case sensitivity of MySQL databases and OceanBase databases. In other words, when lower_case_table_names=0 is set in the source and destination databases, projects cannot be created.

• When you migrate data from OceanBase Database V1.4.x, OMS does not support primary keys that contain data of the FLOAT or DOUBLE type.

• OMS does not support a primary key or unique key that contains data of both the FLOAT and BINARY types.

• OMS does not support an index field greater than 767 bytes (191 characters) in length for MySQL 5.6.

• OMS does not support triggers in the destination database for long-term synchronization between these databases.

• The data source identifiers and user accounts must be globally unique in OMS.

• If temporary tables exist in the MySQL tenant of OceanBase Database of a version earlier than V4.0.0, full migration fails.

• OMS allows you to migrate only databases and tables whose names are ASCII codes and do not contain special characters such as .|"'`()=;/&\n.

• OMS supports full synchronization of tables whose partition fields are not within the primary keys, but does not support DDL operations that create tables.

• You cannot create primary keys and other indexes on the source MySQL tenant of OceanBase Database during data migration on OMS.

Considerations

• If the character set used by the source database is UTF-8, we recommend that you use UTF-8 or a greater character set for the destination database.

• If the clocks are out of synchronization between the nodes or between the client and the server, a negative delay may occur in incremental synchronization or reverse incremental synchronization.

• In a project for migrating data from a MySQL tenant of OceanBase Database to a MySQL database, when the Oracle tenant is of a version earlier than V3.2.x and contains a multi-partition table that has a globally unique index, data may be lost during migration if you update the value of the partitioning key of the table.

• If the value of the explicit_defaults_for_timestamp variable in the source database is different from that in the destination database, data of the TIMESTAMP type may be inconsistent during verification.

• If you change the unique index of the destination, you must restart the incremental synchronization. Otherwise, the data may be inconsistent.

• When the length of a field in the destination database is shorter than that in the source database, the data of this field is automatically truncated by the database, which causes data inconsistency between the source and destination databases.

• The timestamp supported by MySQL tenants of OceanBase Database ranges from 0000-00-00 00:00:00.000000 to 9999-12-31 23:59:59.999999. The timestamp supported by MySQL databases ranges from 1970-01-01 00:00:01.000000 to 2038-01-19 03:14:07.999999. When the source writes a timestamp not supported by the destination, OMS inserts this timestamp and writes it into the error.log file or the exception table.

• If you select migration objects based on matching rules, we recommend that you create standard CTAS statements and set object exclusion rules, such as a.ctas*, to avoid interrupting the data migration project.

• In a multi-table aggregation scenario:

  • We recommend that you map objects in the source and destination databases by importing objects and configuring matching rules.

  • We recommend that you manually create schemas in the destination database. If you use OMS to create schemas, skip failed objects in the schema migration step.

• If you skip the "Check the ROW_MOVEMENT parameter of the database" check item of the source primary database during the migration, data inconsistency may occur when you synchronize tables whose ROW_MOVEMENT is enable.

Data type mapping

Create a data migration project

1. Create a migration project.

   1. Log on to the OMS console.

   2. In the left-side navigation pane, click Data Migration.

   3. On the Data Migration page, click Create Migration Project in the upper-right corner.

2. On the Select Source and Destination page, specify the following parameters.

   Parameter	Description
   Migration Project Name	We recommend that you set it to a combination of digits and letters. It must not contain any spaces and cannot exceed 64 characters in length.
   Tag	Click the field and select a target tag from the drop-down list. You can click Manage Tags to create, modify, and delete tags. For more information, see Use tags to manage data migration projects.
   Source	If you have created a data source for the MySQL tenant of OceanBase Database, select it from the drop-down list. If you have not created a data source for the MySQL tenant, click Create Data Source in the drop-down list and create one in the dialog box that appears on the right. For more information, see Create a physical data source of OceanBase Database. Notice The source cannot be a MySQL tenant of OceanBase Database V4.0.0.
   Destination	If you have created a MySQL data source, select it from the drop-down list. If you have not created a MySQL data source, click Create Data Source in the drop-down list and create one in the dialog box that appears on the right. For more information about parameters, see Create a MySQL data source. You can select a MySQL data source in primary database only mode or primary/standby databases mode. A MySQL data source in standby database only mode cannot serve as the destination for data migration. This topic describes how to create a data migration project with an Oracle data source in primary/standby databases mode.

3. Click Next.

4. In the dialog box that appears, click OK.

   Note that this project supports only tables with a primary key or a non-null unique index and other tables and views are automatically filtered out.

5. On the Select Migration Type page, specify related parameters.

   Options available for Migration Type include Schema Migration, Full Migration, Incremental Synchronization, Full Verification, and Reverse Incremental Migration.

   Migration type	Description
   Schema Migration	The definitions of data objects, such as tables, indexes, constraints, comments, and views, are migrated from the source database to the destination database. Temporary tables are automatically filtered out.
   Full Migration	If you select Full Migration, we recommend that you collect the statistics of the MySQL tenant of OceanBase Database before the data migration. For more information, see Manually collect statistics.
   Incremental Synchronization	Options for Incremental Synchronization are DML Synchronization and DDL Synchronization. You can select the options as needed. For more information about DDL synchronization, see DDL synchronization from a MySQL tenant of OceanBase Database to a MySQL database. Incremental Synchronization has the following limits: OceanBase Database V1.x does not support incremental synchronization. The standby MySQL database does not support incremental synchronization. If you select DDL Synchronization, when you perform a DDL operation that is not supported by OMS in the source database, data migration may fail. If the DDL operation creates a new column, we recommend that you set the attribute of the column to Null. Otherwise, data migration may be interrupted. If you insert columns without data during incremental synchronization, the previous data will be padded based on the current time, causing time inconsistency.
   Full Verification	If you select Full Verification, we recommend that you collect the statistics of the MySQL tenant of OceanBase Database and use the ANALYZE statement to collect the statistics of the MySQL database before the full verification. If you have selected Incremental Synchronization but did not select all DML statements in the DML Synchronization section, OMS does not support full verification.
   Reverse Incremental Migration	You cannot select Reverse Incremental Migration in the following cases: Multi-table aggregation and synchronization is enabled. Multiple schemas are configured in a rule to match one type of objects.

6. (Optional) Click Next.

   When the source database is a MySQL tenant of OceanBase Database:

   • If incremental synchronization needs to be performed, specify the ConfigUrl, username, and password.

   • If only schema migration needs to be performed, specify the username and password.

   If you have selected Schema Migration or Incremental Synchronization but no corresponding parameters are configured for the data source of the source MySQL tenant of OceanBase Database, the More about Data Sources dialog box appears, prompting you to configure related parameters. For more information, see Create a physical data source of OceanBase Database.

   After you configure the parameters, click Test Connectivity. After the test succeeds, click Save.

7. Click Next. On the Select Migration Objects page, select the migration objects and migration scope.

   You can select one of the following two modes to migrate objects: Specify Objects or Match Rules. If you have selected DDL Synchronization, only the Match Rules option is available.

   • Select Specify Objects. Then select the objects to be migrated on the left and click > to add them to the list on the right. You can select tables and views of one or more databases as the migration objects.

     Notice

     • The names of tables to be migrated, as well as the names of columns in the tables, must not contain Chinese characters.

     • If the database or table name contains a double dollar sign ($$), you cannot create the migration project.

     OMS also allows you to import objects from text, rename object names, set row filters, view column information, and remove a single object or all objects to be migrated.

     Operation	Steps
     Import Objects	In the list on the right of the Specify Migration Scope section, click Import Objects in the upper-right corner. In the dialog box that appears, click OK. Notice This operation will overwrite previous selections. Proceed with caution. In the Import Objects dialog box, import the objects to be migrated. You can import CSV files to rename databases/tables and set row filtering conditions. For more information, see Download and import the settings of migration objects. Click Validate. After the validation succeeds, click OK.
     Rename	OMS allows you to rename the migration objects. For more information, see Rename a database table.
     Settings	OMS allows you to use the WHERE clause to filter rows. For more information, see Use SQL conditions to filter data You can also view column information of the migration object in the View Column section.
     Remove/Remove All	During data mapping, OMS allows you to remove one or more selected objects to be migrated to the destination. To remove a single migration object: In the list on the right of the Specify Migration Scope section, hover the pointer over the target object, and click Remove. To remove all migration objects: In the list on the right of the Specify Migration Scope section, click Remove All in the upper-right corner. In the dialog box that appears, click OK.

   • Select Match Rules. For more information, see Configure matching rules for migration objects.

8. Click Next. On the Migration Options page, specify the following parameters.

   Parameter	Description
   Incremental Synchronization Start Timestamp	If you have set the migration type to Full Migration, this parameter is not displayed. If you have selected a migration type other than Full Migration, specify a point in time after which the data is to be synchronized. The default value is the current system time. You can select a point in time or enter a timestamp. Notice You can select the current time or a point in time earlier than the current time. This parameter is closely related to the retention period of archived logs. Generally, you can start data synchronization from the current timestamp.
   Concurrency for Full Migration	The value can be Smooth, Normal, or Fast. The quantity of resources to be consumed by a full data migration task varies based on the migration performance. You can also modify the configurations of the Full-Import component to customize the concurrency. Notice: To enable this feature, select Full Migration on the Select Migration Type page.
   Full Verification Concurrency	The value can be Smooth, Normal, or Fast. Different quantities of resources of the source and destination databases are consumed at different concurrencies. You can also modify the configurations of the Full-Verification component to customize the concurrency.
   Incremental Record Retention Time	The duration that incremental parsed files are cached in OMS. A longer retention period indicates more disk space occupied by the Store component of OMS.
   Whether to Allow Destination Table to Be Not Empty During Full Migration	If destination tables are allowed to be not empty during full migration, full verification is performed in IN mode. Notice: To enable this feature, select Full Migration on the Select Migration Type page.
   Whether to Allow Post-indexing	You can specify whether to allow post-indexing after full migration is completed. Post-indexing can shorten the time of full migration. Notice: To enable this feature, select both Schema Migration and Full Migration on the Select Migration Type page. Only non-unique key indexes can be created after the migration is completed.

9. Click Precheck to start a pre-check on the data migration project.

   During the pre-check, OMS checks the read and write privileges of the database users and the network connections of the databases. The data migration project can be started only after it passes all check items. If an error is returned during the pre-check:

   • You can identify and troubleshoot the problem and then perform the pre-check again.

   • You can click Skip in the Actions column of the pre-check item with the error. A dialog box will be displayed, prompting the impact caused if you skip this error. If you want to continue, click OK in the dialog box.

10. Click Start Project. If you do not need to start the project now, click Save to go to the details page of the data migration project. You can start the project later as needed.

OMS allows you to modify the migration objects when the data migration project is running. For more information, see View and modify migration objects. After a data migration project is started, the migration objects will be executed based on the selected migration type. For more information, see the "View migration details" section in the View details of a data migration project topic.