Deploy OMS Community Edition on a single node

This topic describes how to deploy OceanBase Migration Service (OMS) Community Edition on a single node by using the deployment tool.

Prerequisites

• The installation environment meets the system and network requirements. For more information, see System and network requirements.

• You have created a MetaDB cluster for OMS Community Edition.

• You have obtained the installation package of OMS Community Edition, which is generally a tar.gz file whose name starts with oms. You can download the installation package from OceanBase Download Center.

• You have loaded the installation package of OMS Community Edition to the local image repository of the Docker container.

  docker load -i <Installation package of OMS Community Edition>
  

• You have prepared a directory for mounting the container of OMS Community Edition. In the mount directory, OMS Community Edition will create the /home/admin/logs, /home/ds/store, and /home/ds/run directories for storing the component information and logs generated during the running of OMS Community Edition.

• (Optional) You have prepared a time-series database for storing performance monitoring data and DDL/DML statistics of OMS Community Edition.

Terms

You need to replace variable names in some commands and prompts. A variable name is enclosed with angle brackets (<>).

• Mount directory of the container of OMS Community Edition: the directory to which the container of OMS Community Edition is mounted.

• IP address of the server: the IP address of the host that executes the script. In a single-node deployment scenario, by default, it refers to the IP address in the cluster management (CM) configuration information.

• OMS_IMAGE: After you load the installation package of OMS Community Edition by using Docker, you can run the docker images command to obtain the [IMAGE ID] or [REPOSITORY:TAG] of the loaded image, which is the unique ID <OMS_IMAGE> of this image. Here is an example:

  $sudo docker images
  REPOSITORY                               TAG                 IMAGE ID          
  work.oceanbase-dev.com/obartifact-store/oms feature_4.0.0-ce    2786e8a6eccd        
  

  In this example, <OMS_IMAGE> can be work.oceanbase-dev.com/obartifact-store/oms:feature_4.0.0-ce or 2786e8a6eccd. Replace the value of <OMS_IMAGE> in related commands with the preceding value.

• Directory of the config.yaml file: If you want to deploy OMS based on the current config.yaml configuration file, this directory is the one where the current configuration file is located.

Deployment procedure without a configuration file

If you do not have a configuration file of OMS Community Edition, we recommend that you follow the procedure in this section to generate a new configuration file for deployment. If you have a configuration file, we recommend that you follow the deployment procedure in the next section.

1. Log on to the server where OMS Community Edition is deployed.

2. (Optional) Deploy a time-series database.

   If you need to collect and display OMS monitoring data, deploy a time-series database. Otherwise, you can skip this step. For more information, see Deploy a time-series database.

3. Run the following command to obtain the deployment script from the loaded image:

   sudo docker run -d --net host --name oms-config-tool <OMS_IMAGE> bash && sudo docker cp oms-config-tool:/root/docker_remote_deploy.sh . && sudo docker rm -f oms-config-tool
   

   Here is an example:

   sudo docker run -d --net host --name oms-config-tool work.oceanbase-dev.com/obartifact-store/oms:feature_3.4.0 bash && sudo docker cp oms-config-tool:/root/docker_remote_deploy.sh . && sudo docker rm -f oms-config-tool
   

4. Use the deployment script to start the deployment tool.

   bash docker_remote_deploy.sh -o <Mount directory of the OMS container> -i <IP address of the host> -d <OMS_IMAGE>
   

   The deployment tool of OMS Community Edition automatically verifies the CPU, memory, and disk resources. If any resource item does not meet the requirement, the deployment tool will display a message prompting that insufficient resources will affect the data migration speed.

5. Complete the deployment as prompted. After you set each parameter, press Enter to move on to the next parameter.

   1. Select a deployment mode.

      Select Single Node in Single Region.

   2. Select the task.

      Select No Configuration File. Deploy OMS Starting from Configuration File Generation.

   3. Enter the configuration information of the MetaDB cluster as follows:

      1. Enter the IP address, port, username, and password of the MetaDB.

      2. Set a prefix for databases in the MetaDB.

         For example, when the prefix is set to oms, the databases in the MetaDB are named oms_rm, oms_cm, and oms_cm_hb.

      3. Confirm your settings.

         If the settings are correct, enter y and press Enter to proceed. Otherwise, enter n and press Enter to modify the settings.

         If the system displays "The specified database names already exist in the MetaDB. Are you sure that you want to continue?", it indicates that the database names you specified already exist in the MetaDB. This may be caused by repeated deployment or upgrade of OMS Community Edition. You can enter y and press Enter to proceed, or enter n and press Enter to re-specify the settings.

         If you enter y and press Enter, the message The specified database names already exist in the MetaDB. Do you want to reinitialize the MetaDB? is displayed. You can enter y and press Enter to reinitialize the MetaDB.

   4. Enter the cluster configuration information for OMS Community Edition as follows:

      1. Set whether to define component ports and configure related parameters.

         You can enter y and press Enter to configure custom ports for components. Enter the ports of the Nginx, GHANA, CM, Supervisor, and sshd services as prompted.

      2. Check whether the obtained default IP address is correct.

         The displayed IP address must be the same as the value of the field that you specified when you started the deployment tool. If yes, enter y and press Enter to proceed. Otherwise, enter n and press Enter to modify the settings.

      3. The cluster configuration information of OMS Community Edition is displayed. Check whether the IP address in the URL of the CM service is the host IP address and whether the custom ports are correct. If yes, enter y and press Enter to proceed. Otherwise, enter n and press Enter to modify the settings.

   5. Determine whether to monitor historical data of OMS Community Edition.

      • If you choose to deploy a time-series database in Step 2, enter y and go to Step 6 to enable monitoring for historical data of OMS Community Edition.

      • If you choose not to deploy a time-series database in Step 2, enter n and press Enter to go to the step of determining whether to enable the audit log feature and configure Simple Log Service (SLS) parameters. At this time, the deployed OMS Community Edition does not support historical data monitoring.

   6. Configure the time-series database.

      Perform the following operations:

      1. Confirm whether you have deployed a time-series database.

         Enter the value based on the actual situation. If yes, enter y and press Enter. If no, enter n and press Enter to go to the step of "determining whether to enable the audit log feature and setting SLS parameters".

      2. Set the type of the time-series database to INFLUXDB.

         Notice

         At present, only INFLUXDB is supported.

      3. Enter the URL, username, and password of the time-series database as prompted.

      4. Confirm whether the displayed settings are correct.

         If yes, enter y and press Enter to proceed. Otherwise, enter n and press Enter to modify the settings.

   7. Determine whether to enable the audit log feature and write audit logs in the SLS service.

      To enable the audit log feature, enter y and press Enter to go to the next step to specify the SLS parameters.

      Otherwise, enter n and press Enter to start the deployment. At this time, the deployed OMS Community Edition does not support the audit log feature.

   8. Specify the following SLS parameters:

      1. Set the SLS parameters as prompted.

      2. Confirm whether the displayed settings are correct.

         If yes, enter y and press Enter to proceed. Otherwise, enter n and press Enter to modify the settings.

   9. If the configuration file passes the check, all the settings are displayed. If the settings are correct, enter y and press Enter to proceed. Otherwise, enter n and press Enter to modify the settings.

      If the configuration file fails the check, modify the configuration information as prompted.

   10. Specify the directory to which the container of OMS Community Edition is mounted in the host.

   Specify a directory with a large capacity.

   11. Confirm whether the image file of OMS Community Edition can be named as OMS_IMAGE.

   If yes, enter y and press Enter to proceed. Otherwise, enter n and press Enter to modify the settings.

   12. Determine whether to mount an SSL certificate to the container of OMS Community Edition.

   If yes, enter y, press Enter, and specify the https_key and https_crt directories as prompted. Otherwise, enter n and press Enter.

   13. Confirm whether the path to which the config.yaml configuration file will be written is correct.

   If yes, enter y and press Enter to proceed. Otherwise, enter n and press Enter to modify the settings.

   14. Start the deployment.

   If the deployment fails, you can log on to the container of OMS Community Edition and view logs in the .log file prefixed with docker_init in the /home/admin/logs directory. If the container of OMS Community Edition fails to be started, you cannot obtain logs.

Deployment procedure with a configuration file

If an OMS configuration file exists, you can use the deployment tool to verify the OMS configuration file and directly use the file.

1. Log on to the server where OMS Community Edition is deployed.

2. (Optional) Deploy a time-series database.

   If you need to collect and display OMS monitoring data, deploy a time-series database. Otherwise, you can skip this step. For more information, see Deploy a time-series database.

3. Run the following command to obtain the deployment script from the loaded image:

   sudo docker run --name oms-config-tool <OMS_IMAGE> bash && sudo docker cp oms-config-tool:/root/docker_remote_deploy.sh . && sudo docker rm -f oms-config-tool
   

4. Use the deployment script to start the deployment tool.

   bash docker_remote_deploy.sh -o <Mount directory of the OMS container> -c <Directory of the existing config.yaml file> -i <IP address of the host> -d <OMS_IMAGE>
   

   The deployment tool of OMS Community Edition automatically verifies the CPU, memory, and disk resources. If any resource item does not meet the requirement, the deployment tool will display a message prompting that insufficient resources will affect the data migration speed.

5. Complete the deployment as prompted. After you set each parameter, press Enter to move on to the next parameter.

   1. Select the deployment mode.

      Select Single Node in Single Region.

   2. Select the task.

      Select Use Configuration File Uploaded with Script Option [-c].

   3. If the system displays "The specified database names already exist in the MetaDB. Are you sure that you want to continue?", it indicates that the database names you specified already exist in the MetaDB in the original configuration file. This may be caused by repeated deployment or upgrade of OMS Community Edition. You can enter y and press Enter to proceed, or enter n and press Enter to re-specify the settings.

      If you enter y and press Enter, the message The specified database names already exist in the MetaDB. Do you want to reinitialize the MetaDB? is displayed. You can enter y and press Enter to reinitialize the MetaDB.

   4. If the configuration file passes the check, all the settings are displayed. If the settings are correct, enter y and press Enter to proceed. Otherwise, enter n and press Enter to modify the settings.

      If the configuration file fails the check, modify the configuration information as prompted.

   5. Specify the directory to which the container of OMS Community Edition is mounted in the host.

      Specify a directory with a large capacity.

   6. Confirm whether the image file of OMS Community Edition can be named as OMS_IMAGE.

      If yes, enter y and press Enter to proceed. Otherwise, enter n and press Enter to modify the settings.

   7. Determine whether to mount an SSL certificate to the container of OMS Community Edition.

      If yes, enter y, press Enter, and specify the https_key and https_crt directories as prompted. Otherwise, enter n and press Enter.

   8. Start the deployment.

      If the deployment fails, you can log on to the container of OMS Community Edition and view logs in the .log file prefixed with docker_init in the /home/admin/logs directory. If the container of OMS Community Edition fails to be started, you cannot obtain logs.

To modify the configuration after deployment, log on to the OMS container and perform the following steps:

1. Modify the config.yaml file based on business needs.

2. Run the python -m omsflow.scripts.units.oms_init_manager --init-config-file command.

3. Run the supervisorctl restart oms_console oms_drc_supervisor command.

Template and example of a configuration file

Configuration file template

# Information about the MetaDB for OMS Community Edition
oms_meta_host: ${oms_meta_host}
oms_meta_port: ${oms_meta_port}
oms_meta_user: ${oms_meta_user}
oms_meta_password: ${oms_meta_password}
     
# You can define the names of the following three databases, which are created in the MetaDB during the deployment of OMS Community Edition.
drc_rm_db: ${drc_rm_db}
drc_cm_db: ${drc_cm_db}
drc_cm_heartbeat_db: ${drc_cm_heartbeat_db}
     
# Cluster configuration information of OMS Community Edition
# In single-node deployment mode, the URL of the CM service is generally set to the IP address of the server where OMS Community Edition is deployed. An internal IP address is recommended.
cm_url: ${cm_url}
cm_location: ${cm_location}
# The cm_region parameter is not required in single-node deployment mode.
# cm_region: ${cm_region}
# The cm_region_cn parameter is not required in single-node deployment mode.
# cm_region_cn: ${cm_region_cn}
cm_is_default: true
cm_nodes:
 - ${cm_nodes}
     
# Configurations of the time-series database
# The default value of `tsdb_enabled`, which specifies whether to configure a time-series database, is `false`. To enable metric reporting, set the parameter to `true`.
# tsdb_enabled: false 
# If the `tsdb_enabled` parameter is set to `true`, delete comments for the following parameters and specify the values based on your actual configurations.
# tsdb_service: 'INFLUXDB'
# tsdb_url: '${tsdb_url}'
# tsdb_username: ${tsdb_user}
# tsdb_password: ${tsdb_password}

# Custom component ports
# Specify the port number for the GHANA service.
ghana_server_port: xxxxx
# Specify the port number for the Nginx service.
nginx_server_port: xxxxx
# Specify the port number for the CM service.
cm_server_port: xxxxx
# Specify the port number for the Supervisor service.
supervisor_server_port: xxxxx
# Specify the port number for the sshd service.
sshd_server_port: xxxxx

Sample configuration file

Replace related parameters with the actual values in the target deployment environment.

oms_meta_host: xxx.xxx.xxx.1
oms_meta_port: 2883
oms_meta_user: oms_meta_user
oms_meta_password: ********
drc_rm_db: oms_rm
drc_cm_db: oms_cm
drc_cm_heartbeat_db: oms_cm_heartbeat
cm_url: http://xxx.xxx.xxx.2:8088
cm_location: 100
cm_region: cn-anhui
cm_region_cn: cn-anhui
cm_is_default: true
cm_nodes:
  - xxx.xxx.xxx.2
tsdb_service: 'INFLUXDB'
tsdb_enabled: true
tsdb_url: 'xxx.xxx.xxx.4:8086'
tsdb_username: username
tsdb_password: *******
ghana_server_port: xxxxx
nginx_server_port: xxxxx
cm_server_port: xxxxx
supervisor_server_port: xxxxx
sshd_server_port: xxxxx