9000 ~ 9499

This range indicates backup and restore error codes and STORAGE 3.0 error codes.

ERROR 9001 (HY000): URI error

• OceanBase error code: 9001

• Cause: The destination link specified in the backup and restore settings may be incorrect.

• Solution: Check the backup and restore configurations and modify them as needed.

ERROR 9002 (HY000): OSS file MD5 error

• OceanBase error code: 9002

• Cause: Data verification for the OSS file failed. This may indicate an abnormality with the data on OSS.

• Solution: Contact OSS technical support to investigate the specific cause.

ERROR 9003 (HY000): OSS error

• OceanBase error code: 9003

• Cause: An unknown error occurred in OSS.

• Solution: Contact OSS technical support to investigate the specific cause.

ERROR 9004 (HY000): Init MD5 fail

• OceanBase error code: 9004

• Cause: OpenSSL initialization MD5 error.

• Solution: Contact OceanBase technical support for assistance in troubleshooting.

ERROR 9005 (HY000): Out of element

• OceanBase error code: 9005

• Cause: Exceeded the shard limit.

• Solution: Contact OceanBase technical support for assistance in troubleshooting.

ERROR 9006 (HY000): Update MD5 fail

• OceanBase error code: 9006

• Cause: MD5 update failed.

• Solution: Contact OceanBase Technical Support for assistance.

ERROR 9007 (HY000): Invalid OSS file length

• OceanBase error code: 9007

• Cause: The OSS file length is invalid, possibly due to an incorrect OSS file.

• Solution: Contact OceanBase Technical Support for assistance.

ERROR 9010 (HY000): OSS file MD5 not match

• OceanBase error code: 9010

• Cause: The OSS file checksum does not match, possibly due to abnormal OSS data or a bug in the backup and recovery program.

• Solution: Contact OceanBase Technical Support for assistance.

ERROR 9011 (HY000): cannot find backup file

• OceanBase error code: 9011

• Cause: The backup file cannot be found, possibly due to incorrect backup and recovery configuration.

• Solution: Check the backup and recovery configurations and modify them as needed.

ERROR 9012 (HY000): Can not get data version from timestamp

• OceanBase error code: 9012

• Cause: The data version parameter is not passed in logical restore.

• Solution: Contact OceanBase Technical Support for assistance.

ERROR 9013 (HY000): Write OSS file error

• OceanBase error code: 9013

• Cause: An exception occurred while writing to the OSS file, possibly due to an unknown issue with OSS.

• Solution: Contact OSS Technical Support to investigate the specific cause.

ERROR 9014 (HY000): Another restore is in progress

• OceanBase error code: 9014

• Cause: A tenant with the same name already exists for the tenant to be restored.

• Solution: Check whether the username of the tenant to be restored is duplicated. If so, use a non-duplicated tenant name.

ERROR 9016 (HY000): ob cluster name not equal

• OceanBase error code: 9016

• Cause: The cluster name and URL do not match for the logical backup.

• Solution: Contact OceanBase Technical Support for assistance.

ERROR 9017 (HY000): rs list invalid

• OceanBase error code: 9017

• Cause: The RS list is invalid, possibly due to an incorrect specified RS list.

• Solution: Contact OceanBase Technical Support for assistance.

ERROR 9018 (HY000): agent has failed task

• OceanBase error code: 9018

• Cause: There are failed tasks in the logical backup.

• Solution: Contact OceanBase Technical Support for assistance.

ERROR 9019 (HY000): restore partition is complete

• OceanBase error code: 9019

• Cause: A restore task has been repeatedly scheduled for a partition that has already been restored.

• Solution: No action required.

ERROR 9020 (HY000 ): restore partition twice

• OceanBase error code: 9020

• Cause: A restore task has been repeatedly scheduled for a partition that has already been restored.

• Solution: No action required.

ERROR 9022 (HY000): physical backup switch is on

• OceanBase error code: 9022

• Cause: Tables are delayed for deletion during physical backup.

• Solution: No action is required. The files will be automatically deleted after physical backup is completed.

ERROR 9023 (HY000): cannot start log archive backup

• OceanBase error code: 9023

• Cause: Log archiving cannot be re-enabled during log archiving.

• Solution: Avoid repeatedly scheduling commands to enable log archiving.

ERROR 9024 (HY000): log archive backup is already disabled

• OceanBase error code: 9024

• Cause: Log archiving cannot be re-disabled during the Stop phase.

• Solution: Avoid repeatedly disabling log archiving if it is already disabled.

ERROR 9025 (HY000): log archive backup info not exists

• OceanBase error code: 9025

• Cause: The file containing log archive information does not exist.

• Solution: Contact OceanBase Technical Support for assistance.

ERROR 9026 (HY000): %s is not a valid uri

• OceanBase error code: 9026

• Cause: The backup destination is invalid.

• Solution: Check whether the backup backup_dest is reasonable and provide a valid backup_dest path.

ERROR 9027 (HY000): ob log archive interrupted

• OceanBase error code: 9027

• Cause: Log archiving was interrupted.

• Solution: Check whether a large volume of writes caused log archiving to be overwhelmed. If not, contact OceanBase Technical Support for assistance.

ERROR 9028 (HY000): ob log archive stat not match

• OceanBase error code: 9028

• Error cause: The status of log archiving does not match.

• Solution: Contact OceanBase Technical Support for assistance.

ERROR 9029 (HY000): log archive is not running

• OceanBase error code: 9029

• Error cause: Log archiving is not running. This error is typically printed by the OBServer node when stopping backup.

• Solution: No manual intervention is required. Just exit the log archiving error log normally.

ERROR 9030 (HY000): log archive invalid round

• OceanBase error code: 9030

• Error cause: The round information for log archiving is incorrect.

• Solution: Contact OceanBase Technical Support for assistance.

ERROR 9031 (HY000): Cannot backup ob replica

• OceanBase error code: 9031

• Error cause: The replica is currently migrating or has a log replica, and cannot provide data backup capability.

• Solution: OceanBase Database will retry internally; no manual intervention is needed.

ERROR 9032 (HY000): backup info not exists

• OceanBase error code: 9032

• Error cause: Backup information does not exist.

• Solution: Contact OceanBase Technical Support for assistance.

ERROR 9033 (HY000): Backup meta info stored in system dictionary does not match with current system status

• OceanBase error code: 9033

• Error cause: Backup status is inconsistent.

• Solution:

  • If an error occurs during log archiving on an OBServer node, it usually happens when starting or stopping log archiving and does not require manual intervention.

  • For logs of the root service, contact OceanBase Technical Support to investigate the specific cause.

ERROR 9035 (HY000): restore index failed

• OceanBase error code: 9035

• Error cause: Index rebuilding failed after restore completion.

• Solution: Check for indexes with a lock status of error on internal tables within the restored tenant and recreate those indexes.

ERROR 9036 (HY000): Backup is in progress

• OceanBase error code: 9036

• Error cause: Generally, an operation that is mutually exclusive with backup is being performed.

• Solution: Stop data backup and log archiving before executing this command.

ERROR 9037 (HY000): log archive status is not valid

• OceanBase error code: 9037

• Error cause: The log archive status is invalid.

• Solution: Contact OceanBase Technical Support for assistance in troubleshooting.

ERROR 9038 (HY000): Cannot add replica during set member list in restore

• OceanBase error code: 9038

• Cause: Replication is not supported during the set member list phase.

• Solution: The set member list step of restore does not support replica replication. If a majority of replicas still exist, the restore can continue. If no majority replicas remain, you must cancel the restore and reschedule the restore task.

ERROR 9039 (HY000): pg log archive leader changed

• OceanBase error code: 9039

• Cause: The log archive leader has switched.

• Solution: This is an internal error code. Detection of a leader switch interrupts the current PostgreSQL log archiving process. The new leader will automatically resume the backup work without requiring operational intervention.

ERROR 9040 (HY000): backup can not start

• OceanBase error code: 9040

• Cause: Data backup cannot be started if log archiving is not in the DOING state.

• Solution: Wait for log archiving to enter the DOING state. If it remains in the BEGINNING state for a long time, contact OceanBase Technical Support to investigate the specific cause.

ERROR 9041 (HY000): cancel backup do not allow

• OceanBase error code: 9041

• Cause: Canceling a backup task repeatedly is not allowed.

• Solution: Avoid repeatedly canceling a task that is already being canceled.

ERROR 9042 (HY000): backup data version gap over limit

• OceanBase error code: 9042

• Cause: If data backup is not completed within 16 consecutive Major Merges, it will fail automatically.

• Solution: Investigate the cause of the slow data backup or confirm whether the Major Merges are occurring too frequently.

ERROR 9044 (HY000): delete backup data is in progress

• OceanBase error code: 9044

• Cause: Re-scheduling a backup cleanup task is not allowed.

• Solution: Avoid re-scheduling a backup cleanup task.

ERROR 9045 (HY000): delete backup set do not allow

• OceanBase error code: 9045

• Error cause: Deletion of the backup set is not allowed.

• Solution: Check whether an incorrect deletion command was entered.

ERROR 9046 (HY000): backup set id is not valid

• OceanBase error code: 9046

• Error cause: The backup set ID is invalid. This may be because an invalid backup_set_id was specified.

• Solution: Check whether the entered backup_set_id is correct and try again.

ERROR 9047 (HY000): invalid password for backup

• OceanBase error code: 9047

• Error cause: The password is invalid.

• Solution: Check whether the password is correct and try again.

ERROR 9048 (HY000): backup set is isolated by two log archive round

• OceanBase error code: 9048

• Error cause: Data backup and log archiving are discontinuous.

• Solution: Check whether the log archiving has been interrupted.

ERROR 9049 (HY000): backup status is stopped, can not cancel

• OceanBase error code: 9049

• Error cause: The backup has already stopped and cannot be canceled again.

• Solution: No further action is required because the backup has already stopped.

ERROR 9050 (HY000): no backup data to be backuped up

• OceanBase error code: 9050

• Error cause: The scheduled backup task has no data to back up.

• Solution: This typically occurs during a backup scenario and does not require any handling.

ERROR 9051 (HY000): backup mount file is not valid

• OceanBase error code: 9051

• Cause: There are OBServer nodes that have not mounted NFS.

• Solution: Ensure all nodes have mounted NFS.

ERROR 9052 (HY000): backup clean info not match

• OceanBase error code: 9052

• Cause: The metadata from the backup cleanup is inconsistent.

• Solution: Contact OceanBase Technical Support for assistance.

ERROR 9053 (HY000): cancel delete backup do not allow

• OceanBase error code: 9053

• Cause: A Cancel operation was initiated when no cleanup tasks were present.

• Solution: Avoid initiating a Cancel operation when no cleanup tasks are present.

ERROR 9054 (HY000): backup clean info not exists

• OceanBase error code: 9054

• Cause: The cleanup metadata does not exist.

• Solution: Contact OceanBase Technical Support for assistance.

ERROR 9057 (HY000): can not set backup region, because %s

• OceanBase error code: 9057

• Cause: The backup region cannot be modified.

• Solution: Record the error message and contact OceanBase Technical Support for assistance.

ERROR 9058 (HY000): can not set backup zone, because %s

• OceanBase error code: 9058

• Cause: The backup zone cannot be modified.

• Solution: Record the error message and contact OceanBase Technical Support for assistance.

ERROR 9059 (HY000): backup backup has reached max backup times

• OceanBase error code: 9059

• Cause: Internal error code. This code is primarily used internally during backup scheduling when it is found that neither the backup set nor any backup piece meets the maximum backup times requirement.

• Solution: No action required.

ERROR 9060 (HY000): COS error

• OceanBase error code: 9060

• Cause: An error occurred in the module responsible for Tencent Cloud COS adaptation.

• Solution: This is typically a logical error in OceanBase Database's adaptation to COS. You need to contact OceanBase Technical Support.

ERROR 9061 (HY000): IO limit

• OceanBase error code: 9061

• Cause: This error is caused by I/O limitations. Currently, only the List operation of the Tencent Cloud COS module returns this error code.

• Solution: You need to contact COS customer support to increase or remove the rate limiting for List operations.

ERROR 9062 (HY000): reach backup backup copy limit

• OceanBase error code: 9062

• Cause: When scheduling backups for specified backup times, it is found that all backup_sets and backup_pieces already meet the backup times requirements, and no backup_set or backup_piece to back up is found.

• Solution: No action required.

ERROR 9063 (HY000): backup io is prohibited

• OceanBase error code: 9063

• Cause: The execution of List operations for backup and restore is rate-limited in a COS environment.

• Solution:

  • If this issue occurs occasionally, no action is required.

  • If this issue occurs frequently, you need to contact the backup COS customer support to increase or remove the frequency limit for List operations.

ERROR 9064 (HY000): the archive log and backup data are not continuous

• OceanBase error code: 9064

• Cause: The archived log data is discontinuous from the original backup data.

• Solution:

  • For V2.2.X: You need to perform a major compaction again, then initiate a data backup anew.

  • For V3.1.X and later: Initiate a data backup anew.

ERROR 9065 (HY000): agent has suspended

• OceanBase error code: 9065

• Cause: This error code is returned for tasks being performed when you suspend the backup feature during logical backup recovery.

• Solution: This error code does not affect the functionality. Logical backup will be suspended and can be resumed later.

ERROR 9066 (HY000): %.*s is conflict with %.*s

• OceanBase error code: 9066

• Cause: Conflicting values exist.

• Solution: Check the conflicting values and ensure they do not conflict with other values.

ERROR 9069 (HY000): deleting backup piece is not allowed

• OceanBase error code: 9069

• Cause: Deleting a backup log shard is not allowed.

• Solution: Check if an incorrect delete command was entered.

ERROR 9070 (HY000): can not connect to backup destination

• OceanBase error code: 9070

• Cause: There are OBServer nodes that are not connected to the backup medium, such as NFS not being mounted, or no access permissions for object storage.

• Solution: Mount NFS correctly, or set the correct authorization information for object storage or grant the necessary operational permissions.

ERROR 9071 (HY000): no I/O operation permission at the backup destination

• OceanBase error code: 9071

• Cause: The OBServer node has no permission to operate on the backup medium.

• Solution: Grant the required permissions for the operation.

ERROR 9072 (HY000): obesi process session conflicts

• OceanBase error code: 9072

• Cause: Session conflict in the independent sub-process of backup I/O.

• Solution: No action is required.

ERROR 9073 (HY000): external storage OBS error

• OceanBase error code: 9073

• Cause: An error may have occurred at the storage medium level when the backup medium is Huawei Cloud OBS.

• Solution: You need to check whether the connection and writing to Huawei Cloud OBS are normal.

ERROR 9074 (HY000): backup validation task skipped

• OceanBase error code: 9074

• Cause: The backup verification for a tenant is skipped after the tenant is deleted.

• Solution: No action is required.

ERROR 9075 (HY000): obesi process io error

• OceanBase error code: 9075

• Cause: I/O failure during backup or restore due to an abnormal state of the obesi process.

• Solution: No action is required.

ERROR 9076 (HY000): backup meta index does not exist

• OceanBase error code: 9076

• Cause: The metadata index for the backup data does not exist.

• Solution: Contact technical support for assistance.

ERROR 9077 (HY000): log discontinuous between two archive rounds

• OceanBase error code: 9077

• Cause: When continuously reading archived logs, the logs from two consecutive archive rounds are discontinuous, making it impossible to read them continuously.

• Solution: Contact technical support for assistance.

ERROR 9078 (HY000): archive log is to end

• OceanBase error code: 9078

• Cause: The last archive log has been read.

• Solution: No action is required.

ERROR 9079 (HY000): archive log had been recycled

• OceanBase error code: 9079

• Cause: The archive log has been recycled during continuous reading.

• Solution: Contact technical support for assistance.

ERROR 9080 (HY000): format file does not exist%s

• OceanBase error code: 9080

• Cause: The format file does not exist.

• Solution: Check whether the format file exists at the target location. If not, create it.

ERROR 9081 (HY000): format file does not match%s

• OceanBase error code: 9081

• Cause: The format file at the target location does not match the expected one.

• Solution: Ensure that the format file at the target location matches the expected content.

ERROR 9082 (HY000): backup device out of space

• OceanBase error code: 9082

• Cause: The backup disk has insufficient storage space.

• Solution: Expand the backup storage space.

ERROR 9083 (HY000): the pwrite offset of the object storage is inconsistent

• OceanBase error code: 9083

• Cause: The offset for appending a write to a file during backup or restore does not match the file length.

• Solution: No action required.

ERROR 9084 (HY000): the contents of pwrite are inconsistent

• OceanBase error code: 9084

• Cause: The content of a file after an incremental write during backup or restore does not match its existing content.

• Solution: No action required.

ERROR 9085 (HY000): backup major SSTable range not cover minor SSTable

• OceanBase error code: 9085

• Cause: The range of the backed-up major SSTable does not cover the minor SSTable.

• Solution: No action required. The backup will retry internally.

ERROR 9086 (HY000): backup advance checkpoint by flush timeout

• OceanBase error code: 9086

• Cause: The backup log stream advancement checkpoint timed out.

• Solution: Contact technical support for assistance.

ERROR 9087(HY000): observer clog is recycled before archive

• OceanBase error code: 9087
• Cause: The archive file has been recycled during consumption and archiving.

ERROR 9088 (HY000): log restore source tenant state not match, switchover to primary not allowed

• OceanBase error code: 9088
• Cause: The source tenant/log stream status does not match the restored status, preventing the current tenant from switching to primary.
• Solution:
  1. Check whether the source tenant status and target tenant status match after backup recovery.
  2. Check whether the primary-standby replication configuration is correct.
  3. Check whether the source tenant backup is complete and the target tenant recovery is correct.

ERROR 9089 (HY000): log restore source LS state not match, switchover to primary not allowed

• OceanBase error code: 9089
• Error cause: The source tenant and log stream status do not match for log restore, preventing the current tenant from switching to primary.
• Solution:
  1. Check whether the source log status and target log status for backup and restore match.
  2. Check whether the primary-standby replication configuration is correct.
  3. Check whether the source log backup is complete and the target log restore is correct.

ERROR 9090 (HY000): obesi process session not exist

• OceanBase error code: 9090

• Error cause: The OBESI process session does not exist.

• Solution: The OBESI process restarts automatically and does not require manual intervention.

ERROR 9091 (HY000): Already in ARCHIVELOG mode

• OceanBase error code: 9091

• Error cause: The database is already in ARCHIVELOG mode.

• Solution: This status message indicates no action is required.

ERROR 9092 (HY000): Already in NOARCHIVELOG mode

• OceanBase error code: 9092

• Error cause: The database is already in NOARCHIVELOG mode.

• Solution: This status message indicates no action is required.

ERROR 9096 (HY000): standby binary version is lower than primary data version, standby need upgrade

• OceanBase error code: 9096
• Cause: The version of the standby database lags behind that of the primary database.
• Solution: Check the versions of the standby and primary databases. You must wait for the standby database to complete the version upgrade.

ERROR 9097 (HY000): primary tenant has been dropped

• OceanBase error code: 9097
• Error cause: The primary tenant was dropped during primary-standby synchronization.
• Solution: Check the tenant information in the primary database to confirm whether a primary tenant exists.

ERROR 9098 (HY000): normal object in object_storage(oss,cos,etc.) can't be appended content

• OceanBase error code: 9098
• Error cause: An error occurred when attempting to append content to a regular object in object storage (such as OSS or COS).
• Solution: Check the object storage type and ensure that it supports appending content to regular objects.

ERROR 9099 (HY000): %s restore failed, %s

• OceanBase error code: 9099

• Error cause: The restore operation failed.

• Solution: Check the restore configuration and parameter settings to ensure they meet the requirements and expectations of the restore target.

ERROR 9100 (HY000): no such file or directory

• OceanBase error code: 9100

• Error cause: The storage layer cannot find the corresponding directory or file, possibly due to an issue with the configured storage directory.

• Solution: Contact technical support for assistance.

ERROR 9101 (HY000): file or directory already exist

• OceanBase error code: 9101

• Error cause: The corresponding file or directory already exists.

• Solution: This is an internal error code. Contact technical support for assistance.

ERROR 9105 (HY000): S3 error

• OceanBase error code: 9105

• Cause:

  1. The input bucket is incorrect.
  2. The object storage endpoint is invalid.
  3. An unknown error occurred in S3.

• Solution:

  1. Check whether the input bucket exists.
  2. Check whether the object storage endpoint configuration is correct. Ensure that the endpoint is correctly configured and the object storage service is accessible.
  3. If the possibility of a bucket error is ruled out, contact OceanBase Database Technical Support for assistance.

ERROR 9106 (HY000): Tenant snapshot '%.*s' does not exist

• OceanBase error code: 9106

• Cause: The specified tenant snapshot does not exist.

• Solution: Confirm whether the specified tenant snapshot is correct. If the snapshot does not exist, you may need to create a new snapshot or perform subsequent processing based on the actual situation.

ERROR 9107 (HY000): Tenant snapshot '%.*s' already exist

• OceanBase error code: 9107

• Cause: The specified tenant snapshot already exists.

• Solution: Confirm whether the specified tenant snapshot already exists. If the snapshot already exists, you may need to perform other operations or proceed with subsequent handling based on the actual circumstances.

ERROR 9108 (HY000): Tenant snapshot task timeout. %.*s

• OceanBase error code: 9108

• Cause: The tenant snapshot task timed out.

• Solution: Check whether the execution time of the snapshot task is excessively long. You may need to increase the timeout period or optimize the task execution process.

ERROR 9111 (HY000): Tenant snapshot task failed", "%.*s

• OceanBase error code: 9111

• Error cause: The tenant snapshot task failed.

• Solution: Check the cause of the snapshot task failure and handle it accordingly.

ERROR 9112 (HY000): Tenant snapshot lock conflict", "%s

• OceanBase error code: 9112

• Error cause: A lock conflict occurred during the tenant snapshot operation.

• Solution: Check the details of the snapshot lock conflict. You may need to release the conflicting snapshot lock or adjust the lock usage.

ERROR 9113 (HY000): checksum type %s is not supported for the input destination

• OceanBase error code: 9113

• Error cause: The input destination does not support the %s checksum type.

• Solution: Check the checksum type of the input destination and ensure it is a supported type.

ERROR 9114 (HY000): storage destination is not valid

• OceanBase error code: 9114

• Error cause: The object storage destination is invalid.

• Solution: Check whether the object storage destination is correct and ensure it is a valid destination. You may need to correct the configuration or settings of the object storage destination.

ERROR 9115 (HY000): can not connect to storage destination

• OceanBase error code: 9115

• Cause: Unable to connect to the object storage destination.

• Solution: Check the connection configuration to the object storage destination and ensure the network connection is normal. You may need to correct the connection configuration, access the object storage key, or resolve network connectivity issues.

ERROR 9116 (HY000): no I/O operation permission of the object storage

• OceanBase error code: 9116

• Cause: No I/O operation permission for the object storage.

• Solution: Check the permissions for the object storage and ensure you have the correct I/O operation permissions. You may need to adjust the object storage permission settings or contact the administrator to obtain the appropriate permissions.

ERROR 9117 (HY000): the specified s3_region does not match the endpoint

• OceanBase error code: 9117

• Cause: The s3_region is not specified, or the specified s3_region does not match the endpoint.

• Solution: Check whether the specified s3_region matches the endpoint correctly. Ensure the correct s3_region and corresponding endpoint are used for configuration.

ERROR 9118 (HY000): object storage endpoint is invalid

• OceanBase error code: 9118

• Cause: The object storage endpoint is invalid.

• Solution: Check whether the object storage endpoint configuration is correct. Ensure the endpoint configuration is correct and the object storage service is accessible.

ERROR 9129 (HY000): object storage io error

• OceanBase error code: 9129
• Cause: An object storage error code. Common causes include object storage connectivity and compatibility issues.
• Solution: Check the connectivity of object storage. If no connectivity issues are found, contact technical support for assistance.

ERROR 9133 (HY000): Backup zone or backup idc or backup region invalid

• OceanBase error code: 9133

• Cause: The source Zone/IDC/Region specified for the backup or archive path does not exist (for example, if a cluster has only zones1 and zone2, but you set backup zone to zone=zone3,zone4, this error will be reported when zone3 and zone4 are checked and found to be non-existent).

• Solution: Query the DBA_OB_ZONES view to confirm whether the entered locality exists. Correct it and reset the setting.

ERROR 9135 (HY000):tmp file exceeds disk quota

• OceanBase error code: 9135

• Cause: The amount of data from temporary files persisted on disk exceeds the set limit.

• Solution: Check whether the SQL statement causing the error generates an unexpected amount of data (for example, if the expected maximum data size for persistent temporary files is 500 GB). If so, adjust the parameter temporary_file_max_disk_size to an appropriate value.

ERROR 9136 (HY000): Backup missing mview dependent tablet sstable, sstable maybe recycled

• OceanBase error code: 9136

• Cause: During backup, multi-version major SSTables were recycled.

• Solution: Re-initiate the data backup.

ERROR 9139 (HY000): kms destination is not valid

• OceanBase error code: 9139

• Cause: When transparent encryption is enabled for the backup tenant, the key address is not specified or is specified incorrectly during tenant restore.

• Solution: Specify the correct key address in the restore command, or specify the correct key address by setting the SET @kms_encrypt_info session variable before restore.

ERROR 9140 (HY000): the object is locked by worm

• OceanBase error code: 9140

• Cause: Attempt to delete or modify an object in the object store that is in the retention period.

• Solution: Check whether a retention policy is configured for the backup or archive path, and whether the enable_worm parameter is correctly configured when setting the backup or archive path. If the enable_worm parameter is correctly configured, contact OceanBase Technical Support for assistance.

ERROR 9141 (HY000): the resource has been released

• OceanBase error code: 9141

• Cause: A temporary file macroblock was unexpectedly released during use.

• Solution: Contact OceanBase Technical Support for assistance.

ERROR 9142 (HY000): the object can not be overwritten with different content

• OceanBase error code: 9142

• Cause: Writing a non-idempotent file with the same name to an object store configured with a retention policy.

• Solution: Contact OceanBase Technical Support for assistance.

ERROR 9144 (HY000): Unexpected macro cache file

• OceanBase error code: 9144

• Cause: An unexpected file appears in the macroblock cache directory, possibly one created by the user.

• Solution: Contact OceanBase Technical Support for assistance.

ERROR 9147 (HY000): can not access backup set file

• OceanBase error code: 9147

• Cause: During physical restore execution, the OBServer node cannot access the backup set file in the specified backup medium.

• Solution: Check the connectivity of the object store. If no connectivity issues are found, contact Technical Support for assistance.

ERROR 9148 (HY000): disk quota is exceeded

• OceanBase error code: 9148

• Cause: The disk quota has been exceeded.

• Solution: Clean up the files or adjust the disk quota.

ERROR 9149 (HY000): backup dest is not allowed to set when log_only policy exists

• OceanBase error code: 9149

• Cause: The log_only cleanup policy applies only to scenarios where only log archiving is enabled and no data backup is performed. When the log_only cleanup policy is in effect, configuring a data backup path is not allowed.

• Solution: First, remove the log_only cleanup policy, then configure the data backup path.

ERROR 9150 (HY000): log_only policy is not allowed to set when backup dest exists

• OceanBase error code: 9150

• Cause: The log_only cleanup policy applies only to scenarios where only log archiving is enabled and no data backup is performed. When a data backup path is already configured, the cleanup policy cannot be set to log_only.

• Solution: To use the log_only cleanup policy, you must first delete the configured data backup path.

ERROR 9151 (HY000): backup clean can not start, because %s

• OceanBase error code: 9151

• Cause: Data backup and log archiving cleanup cannot proceed. Possible reasons include the tenant status being non-NORMAL (e.g., CREATING, RESTORE) or the tenant not having a cleanup policy configured (for expiration cleanup scenarios).

• Solution: Check the tenant status. For expiration cleanup scenarios, confirm whether the relevant tenant has a properly configured cleanup policy.

ERROR 9152 (HY000): backup device may be not mounted, %s did not read any data written by %s

• OceanBase error code: 9152

• Error cause: The backup medium is not properly mounted.

• Solution: Properly mount the backup medium to ensure all OBServer nodes of the tenant initiating the archiving, backup, or restore operation can access the same backup medium. For detailed operations on mounting NFS, refer to Deploy NFS.

ERROR 9153 (HY000): backup device is not read and write strongly consistent. %s did not read the latest data written by %s.

• OceanBase error code: 9153

• Error cause: The read and write operations on the backup medium are not strongly consistent.

• Solution: If the backup medium is NFS, refer to Deploy NFS and mount it as specified. If the backup medium is object storage, contact the corresponding service provider.

ERROR 9159 (HY000): available data backup set is not found

• OceanBase error code: 9159

• Error cause: No backup set is available to restore to the specified time.

• Solution: Select a different restore point or specify another backup set path.

ERROR 9162 (HY000): can not find any backup set or archive piece

• OceanBase error code: 9162

• Error cause: The specified backup set ID/archive log piece does not exist in the backup path/archive path.

• Solution: Check whether the provided path is correct.

ERROR 9200 (HY000): Extend ssblock file to smaller is not allowed

• OceanBase error code: 9200

• Cause: The SSBlock file cannot be reduced.

• Solution: Check whether the size specified by ALTER SYSTEM SET datafile_size is larger than the current SSBlock file. If so, contact technical support for assistance.

ERROR 9201 (HY000): Mark blocks timeout(5s) in auto extend process when alloc block fail

• OceanBase error code: 9201

• Cause: Macroblock marking failed after the SSBlock file was automatically extended.

• Solution: Contact technical support for assistance.

ERROR 9202 (HY000): Auto extend param is not ready to start extending file

• OceanBase error code: 9202

• Cause: Automatic expansion may not be enabled due to configuration issues, or the preset disk usage of datafile has reached its limit.

• Solution: Check if the free_size field in the __all_virtual_disk_stat table is 0. If so, disk space is exhausted. You need to increase the datafile threshold or perform disk expansion.