oceanbase.DBA_OB_TENANT_EVENT_HISTORY

Overview

The oceanbase.DBA_OB_TENANT_EVENT_HISTORY view displays the historical operation records of the current tenant.

Columns

Examples of typical tenant events

Typical tenant event modules include: TENANT ROLE CHANGE (primary/standby tenant switchover) and SERVICE NAME.

When a user performs different module operations, the corresponding event NAME and VALUE values vary.

TENANT ROLE CHANGE

The TENANT ROLE CHANGE module includes three operations: FAILOVER TO PRIMARY, SWITCHOVER TO PRIMARY, and SWITCHOVER TO STANDBY.

• FAILOVER TO PRIMARY OPERATION

  When a user initiates a FAILOVER TO PRIMARY operation, the following important events are recorded in the tenant's event log table.

  • FAILOVER TO PRIMARY START

    This event records the specific moment when the ALTER SYSTEM ACTIVATE STANDBY command is executed and the related tenant information.

    Attribute	Attribute value
    NAME1:STMT_STR	VALUE1:User input command text
    NAME2:TENANT_INFO	VALUE2:The status or information of the tenant when the command is initiated.

  • FAILOVER TO PRIMARY END

    This event records the exact moment when the ALTER SYSTEM ACTIVATE STANDBY command is completed. It includes information about the tenant that performed the operation, the final status of the log stream, and timing details for key steps.

    Attribute	Attribute value
    NAME1:STMT_STR	VALUE1:User input command text
    NAME2:TENANT_INFO	VALUE2:The status or information of the tenant at the end of the command.
    NAME3: FAILOVER_SCN	VALUE3: The synchronization timestamp after tenant failover.
    NAME4:COST_DETAIL	VALUE4:The time consumed in each phase during command execution, in microseconds.
    NAME5:ALL_LS	VALUE5:All log stream statuses when the tenant modifies the ACCESS MODE

• SWITCHOVER TO PRIMARY operation

  When a user initiates a SWITCHOVER TO PRIMARY operation, the following important events are recorded in the tenant's event log table.

  • SWITCHOVER TO PRIMARY START

    This event records the specific moment when the ALTER SYSTEM SWITCHOVER TO PRIMARY command is executed and the related tenant information.

    Attribute	Attribute value
    NAME1:STMT_STR	VALUE1:User input command text
    NAME2:TENANT_INFO	VALUE2:The status or information of the tenant when the command is initiated.

  • WAIT LOG SYNC

    This event records information related to tenant log synchronization. When a user executes the ALTER SYSTEM SWITCHOVER TO PRIMARY command, the involved tenant must wait until all the latest log records are synchronized from the current primary tenant to ensure data consistency and integrity.

    Attribute	Attribute value
    NAME1:IS_SYS_LS_SYNCED	VALUE1:Whether the tenant's system log stream is synchronized
    NAME2:IS_ALL_LS_SYNCED	VALUE2:Whether all log streams of the tenant are synchronized
    NAME3:NON_SYNC_INFO	VALUE3:If there are log streams that are out of sync, the system displays the number of such streams and provides information about the five log streams with the slowest synchronization speeds.

  • SWITCHOVER_TO_PRIMARY_END

    This event records the exact moment when the ALTER SYSTEM SWITCHOVER TO PRIMARY command is completed. It includes information about the tenant that performed the operation, the final status of the log stream, and detailed timing for each key step.

    Attribute	Attribute value
    NAME1:STMT_STR	VALUE1:User input command text
    NAME2:TENANT_INFO	VALUE2:The status or information of the tenant at the end of the command.
    NAME3:SWITCHOVER_SCN	VALUE3:The synchronization timestamp after tenant switchover.
    NAME4:COST_DETAIL	VALUE4:The time consumed in each phase during command execution, in microseconds.
    NAME5:ALL_LS	VALUE5:All log stream statuses when the tenant modifies the ACCESS MODE

• SWITCHOVER TO STANDBY operation

  When a user initiates a SWITCHOVER TO STANDBY operation, the following important events are recorded in the tenant's event log table.

  • SWITCHOVER TO STANDBY START

    This event records the specific moment when the ALTER SYSTEM SWITCHOVER TO STANDBY command is executed and the related tenant information.

    Attribute	Attribute value
    NAME1:STMT_STR	VALUE1:User input command text
    NAME2:TENANT_INFO	VALUE2:The status or information of the tenant when the command is initiated.

  • SWITCHOVER TO STANDBY END

    This event records the exact moment when the ALTER SYSTEM SWITCHOVER TO STANDBY command is completed. It includes information about the tenant that performed the operation, the final status of the log stream, and detailed timing for each key step.

    Attribute	Attribute value
    NAME1:STMT_STR	VALUE1:User input command text
    NAME2:TENANT_INFO	VALUE2:The status or information of the tenant at the end of the command.
    NAME3:SWITCHOVER_SCN	VALUE3:The synchronization timestamp after tenant switchover.
    NAME4:COST_DETAIL	VALUE4:The time consumed in each phase during command execution, in microseconds.
    NAME5:ALL_LS	VALUE5:All log stream statuses when the tenant modifies the ACCESS MODE

SERVICE NAME

The SERVICE NAME module includes four operations: CREATE SERVICE, DELETE SERVICE, START SERVICE, and STOP SERVICE.

These four operations can be retrieved using the TRACE_ID. For example, by locating the service creation event, you can trace back to the broadcasts triggered during the service creation process based on that event's TRACE_ID.

• CREATE SERVICE

  The following events are recorded when a service is created for a user tenant.

  • BROADCAST SERVICE NAME

    This event records in detail the broadcast content, the list of target OBServer machines, and the list of OBServer machines that successfully received the broadcast. When you execute the ALTER SYSTEM CREATE SERVICE command, the OBServer that initiates the command broadcasts the current service name information of the tenant to all OBServer machines where units belonging to the tenant are located.

    Attribute	Attribute value
    NAME1:EPOCH	VALUE1:The version of information about all current service names of the tenant in this broadcast.
    NAME2:TARGET_SERVICE_NAME_ID	VALUE2:The service_name_id that triggered this broadcast event.
    NAME3:SERVICE_NAME_LIST	VALUE3:Information about all current service names of the tenant
    NAME4:SERVICE_NAME_COMMAND_TYPE	VALUE4:The operation type that triggered this broadcast event.
    NAME5:TARGET_SERVERS_LIST	VALUE5:All non-permanently offline servers where the units of the tenant reside.
    NAME6:SUCCESS_SERVERS_LIST	VALUE6:List of servers that broadcast successfully.

  • CREATE SERVICE

    This event records the name of the service to be created and the related details after the service is created. It is generated after the user's executed ALTER SYSTEM CREATE SERVICE command completes.

    Attribute	Attribute value
    NAME1:SERVICE_NAME_STRING	VALUE1:The name of the new service you want to create.
    NAME2:CREATED_SERVICE_NAME	VALUE2:Information about the created service name

• DELETE SERVICE

  The following events are recorded when a user tenant is deleted.

  • DELETE SERVICE

    This event records information related to the command initiation time. It is generated after a user's ALTER SYSTEM DELETE SERVICE command is completed.

    Attribute	Attribute value
    NAME1:DELETED_SERVICE_NAME	VALUE1:Information about the service name to be deleted

• START SERVICE

  The following events are recorded when a user tenant has its service started.

  • BROADCAST SERVICE NAME

    This event records in detail the broadcast content, the list of target OBServer machines, and the list of OBServer machines that successfully received the broadcast. When you execute the ALTER SYSTEM SERVICE NAME command, the OBServer that initiates the command broadcasts the current service name of the tenant to all OBServer machines where units belonging to the tenant are located.

    Attribute	Attribute value
    NAME1:EPOCH	VALUE1:The version of information about all current service names of the tenant in this broadcast.
    NAME2:TARGET_SERVICE_NAME_ID	VALUE2:The service_name_id that triggered this broadcast event.
    NAME3:SERVICE_NAME_LIST	VALUE3:The current all service_name of the tenant
    NAME4:SERVICE_NAME_COMMAND_TYPE	VALUE4:The operation type that triggered this broadcast event.
    NAME5:TARGET_SERVERS_LIST	VALUE5:All non-permanently offline servers where the units of the tenant reside.
    NAME6:SUCCESS_SERVERS_LIST	VALUE6:The servers that broadcast successfully.

  • START SERVICE

    This event records information about the start and end times of a command. It is generated after the user-executed ALTER SYSTEM START SERVICE command completes.

    Attribute	Attribute value
    NAME1:SERVICE_NAME_BEFORE	VALUE1:Information about the service name before the service is started.
    NAME2:SERVICE_NAME_AFTER	VALUE2:Information about the service name after startup

• STOP SERVICE

  When a user tenant is stopped, the following event is recorded.

  • KILL CONNECTIONS OF SERVICE NAME

    Each OBServer terminates the connections established through the stopped service name and then generates a record in the tenant event view. If no connections are established through the stopped service name on an OBServer, the event is not recorded in the table.

    Attribute	Attribute value
    NAME1:SERVICE_NAME	VALUE1:Information about the stopped service name
    NAME2:KILLED_CONNECTIONS_COUNT	VALUE2:Number of killed connections
    NAME3:KILLED_CONNECTIONS_LIST	VALUE3:The IDs of the killed connections.

  • BROADCAST SERVICE NAME

    This event details the broadcast content, the list of target OBServer machines, and the list of OBServer machines that successfully received the broadcast. When you execute the ALTER SYSTEM STOP SERVICE command, the OBServer that initiates the command broadcasts the current service name of the tenant to all OBServer machines where units belonging to that tenant are located.

    Attribute	Attribute value
    NAME1:EPOCH	VALUE1:The version of information about all current service names of the tenant in this broadcast.
    NAME2:TARGET_SERVICE_NAME _ID	VALUE2:The service _name _id that triggered this broadcast event.
    NAME3:SERVICE_NAME_LIST	VALUE3:The current tenant's all service_names
    NAME4:SERVICE_NAME_COMMAND_TYPE	VALUE4:The operation type that triggered this broadcast event.
    NAME5:TARGET_SERVERS_LIST	VALUE5:All non-permanently offline servers where the units of the tenant reside. These are the servers for target broadcasting.
    NAME6:SUCCESS_SERVERS_LIST	VALUE6:The list of servers that successfully received the broadcast.

  • STOP SERVICE

    This event records information about the start and end times of a command. It is generated after the user-initiated ALTER SYSTEM STOP SERVICE command is completed.

    Attribute	Attribute value
    NAME1:SERVICE_NAME_BEFORE	VALUE1:Information about the service name before service stop.
    NAME2:SERVICE_NAME_AFTER	VALUE2:Information about the service name after service stop.

DBMS_BALANCE

The DBMS_BALANCE module provides four operations: TRIGGER PARTITION BALANCE, SET BALANCE WEIGHT, CLEAR BALANCE WEIGHT, and CLEAR EXPIRED BALANCE WEIGHT.

• TRIGGER PARTITION BALANCE operations

  When a user initiates a DBMS_BALANCE.TRIGGER_PARTITION_BALANCE operation, a TRIGGER PARTITION BALANCE event is recorded in the tenant's event log table.

  The TRIGGER PARTITION BALANCE event records the specific moment when the DBMS_BALANCE.TRIGGER_PARTITION_BALANCE command is initiated and its related parameter information.

  Attribute	Attribute value
  NAME1:BALANCE_TIMEOUT_S	VALUE1:The timeout parameter when balancing is triggered, in seconds.

• SET BALANCE WEIGHT

  When a user initiates a DBMS_BALANCE.SET_BALANCE_WEIGHT operation, a SET BALANCE WEIGHT event is recorded in the tenant's event log table.

  The SET BALANCE WEIGHT event records the specific moment when the DBMS_BALANCE.SET_BALANCE_WEIGHT command is executed and its related parameter information.

  Attribute	Attribute value
  NAME1:WEIGHT	VALUE1:Partition weight
  NAME2:DATABASE_NAME	VALUE2:The name of the database to which the table for setting partition weights belongs.
  NAME3:TABLE_NAME	VALUE3:The name of the table for which you want to set partition weights.
  NAME4:PARTITION_NAME	VALUE4:The name of the partition for which you want to set the weight.
  NAME5: SUBPARTITION_NAME	VALUE5: The name of the subpartition for which you want to set the partition weight.

• CLEAR BALANCE WEIGHT

  When a user initiates a DBMS_BALANCE.CLEAR_BALANCE_WEIGHT operation, a CLEAR BALANCE WEIGHT event is recorded in the tenant's event log table.

  The CLEAR BALANCE WEIGHT event records the specific moment when the DBMS_BALANCE.CLEAR_BALANCE_WEIGHT command is initiated and its related parameter information.

  Attribute	Attribute value
  NAME1:DATABASE_NAME	VALUE1:The name of the database to which the table whose partition weights are to be cleared belongs.
  NAME2:TABLE_NAME	VALUE2:The name of the table whose partition weights are cleared
  NAME3: PARTITION_NAME	VALUE3: The name of the partition whose weight is to be cleared
  NAME4:SUBPARTITION_NAME	VALUE4:Name of the subpartition whose partition weight is to be cleared

• CLEAR EXPIRED BALANCE WEIGHT

  When the background thread cleans up expired partition weights, a CLEAR EXPIRED BALANCE WEIGHT event is recorded in the tenant's event log table.

  The CLEAR EXPIRED BALANCE WEIGHT event records the specific time and related parameter information when the backend cleans up expired partition weights.

  Attribute	Attribute value
  NAME1:TABLE_NAME	VALUE1:The name of the table whose expired partitions are to be cleaned up.
  NAME2:PARTITION_NAME	VALUE2:The name of the partition whose weight of expired partitions is to be cleared
  NAME3:SUBPARTITION_NAME	VALUE3:Name of the subpartition whose weight is to be cleared

Sample query

Query the historical operation records of this tenant and display the first record.

obclient [oceanbase]> SELECT * FROM oceanbase.DBA_OB_TENANT_EVENT_HISTORY LIMIT 1\G

The query result is as follows:

*************************** 1. row ***************************
 TIMESTAMP: 2023-12-14 14:33:20.321725
    MODULE: TENANT ROLE CHANGE
     EVENT: SWITCHOVER TO STANDBY END
     NAME1: STMT_STR
    VALUE1: ALTER SYSTEM SWITCHOVER TO STANDBY TENANT backup_mysql_tenant
     NAME2: TENANT_INFO
    VALUE2: {tenant_id:1002, tenant_role:"STANDBY", switchover_status:"NORMAL", switchover_epoch:1702535600271677, sync_scn:1702535620070597000, replayable_scn:1702535620070597000, readable_scn:1702535620070597000, recovery_until_scn:4611686018427387903, log_mode:"ARCHIVELOG", max_ls_id:1003}
     NAME3: SWITCHOVER_SCN
    VALUE3: 1702535620070597000
     NAME4: COST_DETAIL
    VALUE4: WAIT_LOG_END: 100190, CHANGE_ACCESS_MODE: 47261, OTHERS: 136839
     NAME5: ALL_LS
    VALUE5: NORMAL: 1, 1001, 1002, 1003
     NAME6: NULL
    VALUE6:
EXTRA_INFO: NULL
    SVR_IP: 100.xx.xx.xx
  SVR_PORT: 13324
  TRACE_ID: Y340C64586BD4-00060C724AEB962B-0-0
 COST_TIME: 284290
  RET_CODE: 0
 ERROR_MSG: NULL
1 row in set

References

• Create a service
• View service status
• Start the service
• Pause service
• Delete service